@article {46998,
	title = {Alkyl-group-wrapped unsymmetrical squaraine dyes for dye-sensitized solar cells: branched alkyl chains modulate the aggregation of dyes and charge recombination processes},
	journal = {ACS Applied Materials \& Interfaces},
	volume = {12},
	year = {2020},
	month = {JAN},
	pages = {2555-2565},
	type = {Article},
	abstract = {<p>Electron transfer processes at the interfaces dictate the factors that improve the photovoltaic parameters, such as open-circuit voltage (V-oc) and short-circuit current (J(sc)), of a dye-sensitized solar cell device, besides selection of a set of suitable anode, dye, electrolyte, and cathode materials. An inefficient charge injection process at the dye-TiO2 interface and charge recombination at the TiO2-dye/electrolyte interface have detrimental effects on improving both J(sc) and V-oc. Hence, tailoring the factors that govern the improvement of J(sc) and V-oc will be an ideal approach to get the desired sensitizers with good device efficiencies. Squaraines are far-red-active zwitterionic dyes and have a high molar extinction coefficient along with unique aggregation properties due to the large dipole moment associated with them. Here, we report a series of unsymmetrical squaraine dyes, SQS1 to SQS6, with systematic variation of alkyl groups at the sp(3)-C and N-atoms of the indoline unit that is away from the anchoring group to control the dye-dye interactions on the TiO2 surface. The branched alkyl groups help in modulating the self-assembly of sensitizers on the TiO2 surface, besides passivating the surface that helps avoid the charge recombination processes. Light harvesting efficiency and cyclic voltammetry studies of dye-sensitized TiO2 electrodes indicate that the aggregation and charge hopping process between the dye molecules can be modulated, respectively, by systematically increasing the number of carbon atoms in the alkyl groups. Such a variation in the branched alkyl group helps enhance V-oc from 672 (SQS1) to 718 mV (SQS6) and J(sc) from 7.95 (SQS1) to 12.22 mA/cm(2) (SQS6), with the device efficiency ranging from 3.82\% to 6.23\% without any coadsorbent. Dye SQS4 achieves the highest efficiency of 7.1\% (V-oc = 715 mV, J(sc) = 13.05 mA/cm(2)) with coadsorbent chenodeoxycholic acid (CDCA) using an iodine (I-/I-3(-)) electrolyte compared to its analogues. An analysis of the incident photon-to-current efficiency profiles indicates that the major contribution to photocurrent generation is from the aggregated squaraine dyes on TiO2.</p>
},
	keywords = {aggregation of dye, charge injection, charge recombination, Dye-sensitized solar cells, unsymmetrical squaraines},
	issn = {1944-8244},
	doi = {10.1021/acsami.9b19809},
	author = {Singh, Ambarish Kumar and Kavungathodi, Munavvar Fairoos Mele and Nithyanandhan, Jayaraj}
}
@article {49516,
	title = {Effect of cyclization and alkyl group wrapping in visible-light-active unsymmetrical squaraine dyes for dye-sensitized solar cells},
	journal = {ACS Applied Energy Materials},
	volume = {8},
	year = {2025},
	month = {APR },
	pages = {5017-5030},
	type = {Article},
	abstract = {<p>
	A series of alkyl group-appended indoline- and carboxylic acid-functionalized indolenine-based visible-light-active unsymmetrical squaraine dyes, SQA7-10, were designed, synthesized, and utilized for the dye-sensitized solar cells device fabrication. The number of alkyl group has been increased systematically on the indoline moiety to control the self-assembly of dyes on TiO2 and to passivate the photoanode that helps in improving the open-circuit voltage (V-OC) by avoiding the charge recombination process. SQA7-10 dyes showed an absorption between lambda(max) 536-540 nm, with molar extinction coefficients of 1.62-2.13 x 10(5) M-1 cm(-1) in CH3CN. Further, ultraviolet-visible (UV-vis) studies on TiO2 indicated the formation of H-aggregated dyes (505-510 nm), which can be controlled by appending the alkyl groups. The energy levels of the highest occupied molecular orbital (HOMO) of these dyes are well aligned with the Nernst potentials of I-/I(3)(-)electrolyte and [Cu(tmby)(2)](+/2+) electrolytes with sufficient overpotentials required for the dye regeneration process. DSSC devices made with these dyes showed systematic enhancements of open-circuit voltage (V-OC) and device efficiency with respect to alkyl group incorporation for SQA7-10 with I-/I-3(-) electrolytes. All of the SQA dyes exhibited the device V-OC of more than 805 mV, where the introduction of alkyl groups systematically enhanced the V-OC in the order of SQA7 (805 mV) \&lt; SQA8 (829 mV) \&lt; SQA9 (843 mV) \&lt; SQA10 (862 mV) without any addition of CDCA. Within the SQA dye series, SQA10 dye has achieved the highest DSSC device efficiency of 7.52\% (J(sc) of 11.16 mA/cm(2), V-oc of 862 mV, and ff of 78\%) with I-/I-3(-) electrolyte, whereas use of [Cu(tmby)(2)](+/2+) redox shuttle with SQA10 showed enhanced V-oc (1080 mV) and device efficiency (8.35\%). The IPCE profile for the device fabricated with SQA dyes showed good response at 480 and 560 nm, which indicates the photocurrent generation from the aggregated structures.</p>
},
	keywords = {aggregation of dyes, charge recombination, Dye-sensitized solar cells, indoline and indolenine donors, visible-light-activeunsymmetrical squaraine dye},
	issn = {2574-0962},
	doi = {10.1021/acsaem.4c03116},
	author = {Jadhav, Avinash P. and Singh, Ambarish Kumar and Shivankar, Bhavana R. and Siby, Jesna and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj}
}
