@article {46799,
	title = {Electrochemical performance of pre-lithiated ZnMoO4 and r-GO@ZnMoO4 composite anode for lithium-ion battery application},
	journal = {Journal of the Taiwan Institute of Chemical Engineers},
	volume = {112},
	year = {2020},
	month = {JUL},
	pages = {60-66},
	type = {Article},
	abstract = {<p>Exploring a safer replacement of Li metal anode is crucial for technological, and fundamental importance. Li-metal is a preferred choice as anode material for lithium-ion battery (LIB) applications. However, parasitic dendritic growth on the Li metal surface during cycling causes instability and safety dreads. In the present study, we have investigated that the pre-lithiated ZnMoO4 is superior to its carbon-based counterparts (r-GO@ZnMoO4), moreover safer and sustainable than Li metal anode. The pre-lithiated ZnMoO4 delivers a better reversible capacity (similar to 1000 mAhg(-1) at 0.1 Ag-1), superior rate capability (similar to 400 mAh g(-1) at 2 Ag-1), and excellent cycling stability over 300 cycles at 0.1 Ag-1, as compared to bare ZnMoO4 and r-GO@ZnMoO4 composite. The present investigation is an attempt to provide a substitute for commonly used Li-metal/carbon anodes with better performance. (C) 2020 Taiwan Institute of Chemical Engineers. Published by Elsevier B.V. All rights reserved.</p>
},
	keywords = {Cycling stability, Electrochemistry, Li-ion battery, Nyquist plot, Rate performance, ZnMoO4 nanocomposites},
	issn = {1876-1070},
	doi = {10.1016/j.jtice.2020.07.009},
	author = {Bin Masood, Khalid and Parte, Golu and Jain, Neha and Dwivedi, Pravin K. and Kumar, Pushpendra and Shelke, V, Manjusha and Patel, Rp and Singh, Jai}
}
@article {48010,
	title = {Honeycomb boron carbon nitride as high-performance anode material for li-ion batteries},
	journal = {ChemNanoMat},
	volume = {8},
	year = {2022},
	month = {JUL},
	pages = {e202200056},
	type = {Article},
	abstract = {<p>
	3D Porous carbon-based materials are well known for their excellent mechanical and electrochemical properties for various energy storage applications including Li-ion Battery (LIB) anodes. However, their commercial application is limited due to their low theoretical specific capacity. Heteroatom doping in carbonaceous networks proved an efficient way to modify the surface properties, which considerably improves the Li intake capacity and Li diffusion in porous carbon materials. In this work, we have synthesized 3D honeycomb boron carbon nitride (HBCN) from boric acid, glucose, and cyanamide. Silica nanoparticles (SiO2 NPs) are used as structure-directing agents to replicate well-organized honeycomb structures. HBCN possesses a high specific surface area (SSA) of similar to 597 m(2) g(-1), with a uniform porosity distribution, low charge transfer resistance, and steady Li flux. When analyzed as an anode material for LIB, HBCN demonstrated an excellent specific capacity of similar to 652 mAhg(-1) and 408 mAhg(-1) at an input current density of 100 mAg(-1) and 1 Ag-1 respectively and an energy density of 227 Wh kg(-1) at 1 C rate in a full cell LIB. These results indicate that the doping of B and N hetero atoms is significantly advantageous for LIBs application.</p>
},
	keywords = {3D-Architecture, Heteroatom Doping, High-Performance Anode, Honeycomb boron carbon nitride (HBCN), Li-ion battery},
	issn = {2199-692X},
	doi = {10.1002/cnma.202200056},
	author = {Karbhal, Indrapal and Chaturvedi, Vikash and Patrike, Apurva and Yadav, Poonam and Shelke, V, Manjusha}
}
