@article {48023, title = {Catalytic conversion of sucrose to 1,2-propanediol over alumina-supported Ni-Mo bimetallic catalysts}, journal = {Sustainable Energy \& Fuels}, volume = {6}, year = {2022}, month = {JUL}, pages = {3681-3689}, type = {Article}, abstract = {

Ni-Mo supported on gamma-Al2O3 catalysts were synthesized to test its catalytic activity towards sucrose to 1,2-propanediol (1,2-PDO) conversion. The catalyst system was characterized using various physicochemical methods, including XRD, BET, py-FTIR, XPS, FE-SEM, HR-TEM and ICP. The metal combination of 8\%Ni-20\%Mo/gamma-Al2O3 is found to be effective in producing a good yield of 1,2-propanediol (similar to 74\%) under mild reaction conditions of 180 degrees C, 40 bar H-2 pressure and a run time of 4.5 h in a batch reaction. The activity of the active catalyst over various substrates such as cellulose, glucose, fructose and real-source biomass has also been investigated. XPS analysis of the active catalyst confirms the various oxidation states of the metals Ni and Mo in the active catalyst. The py-IR results show that the optimum Lewis to Bronsted acidic site ratio is responsible for the selective conversion of sucrose to 1,2-PDO. The presence of interparticle mesopores on gamma-Al2O3 helps in the high conversion of sucrose. Furthermore, the catalyst has been found reusable for four consecutive runs without any structural or morphological changes.

}, issn = {2398-4902}, doi = {10.1039/d2se00610c}, author = {Sreekantan, Sreejith and Kirali, Arun Arunima Balachandran and Marimuthu, Banu} } @article {48038, title = {Ce promoted Cu/?-Al2O3 catalysts for the enhanced selectivity of 1,2-pro-panediol from catalytic hydrogenolysis of glucose}, journal = {Catalysis Communications}, volume = {165}, year = {2022}, month = {MAY}, pages = {106447}, type = {Article}, abstract = {

Ce promoted Cu/gamma-Al2O3 catalysts were prepared with varying amounts of Cu (x = 0-10 wt\%) and Ce (y = 0-15 wt\%). The prepared catalysts were characterized and tested for the conversion of aqueous glucose (5 wt\%) to 1,2propanediol in a batch reactor. 10\%Ce-8\%Cu/gamma-Al2O3 \& nbsp;showed the complete conversion of glucose with 62.7\% selectivity of 1,2-propanediol and total glycols (1,2-propanediol, ethylene glycol \& 1,2-butanediol) of 81\% at milder reaction conditions. Cu facilitated the hydrogenation activity and Ce loading optimize the acid/base sites of Cu/gamma-Al2O3 which obtain high selectivity of 1, 2-propanediol. Catalyst reusability is reported.

}, keywords = {2-Propanediol

,

1, Cu-Ce catalyst, ethylene glycol, Gamma alumina, Glucose hydrogenolysis}, issn = {1566-7367}, doi = {10.1016/j.catcom.2022.106447}, author = {Kirali, Arun Arunima Balachandran and Sreekantan, Sreejith and Marimuthu, Banu} } @article {48959, title = {Ligand-free one-pot synthesis of Ru/W18O49 self-assembled hierarchical coral-like nanostructures for selective conversion of glucose into glycols}, journal = {ACS Applied Nano Materials }, volume = {6}, year = {2023}, month = {DEC }, pages = {22635-22642}, type = {Journal Article}, abstract = {

In this study, we report a simple inorganic route for the synthesis of Ru/W18O49 self-assembled coral-like nanostructures, with the following advantages: It is one step and requires no surfactant or stabilizing agent; Ru loading is easily tuned, and the as-synthesized nanomaterials can be used as a catalyst without any further processing. The preliminary investigations of the catalytic performance of these as-synthesized Ru/W18O49 nanomaterials appear quite promising for converting glucose to glycols. The total glycol selectivity of 82.6\% with 100\% conversion of glucose was obtained over 0.03 wt \% Ru loading on tungsten nanostructures, which turns out to be the lowest Ru loading\% on support reported to date to achieve the highest total glycol selectivity among the previously reported catalyst based on Ru-nano/composite materials. Additionally, preliminary results show that the concentration of Ru on W18O49 significantly affects the selectivity of the glycol production. Thus, our methodology will open up a wide range of opportunities regarding the choice of metals, stoichiometric/nonstoichiometric WOx (x=1-3) as support, and the viability of further catalytic manipulations. A probable catalytic mechanism for this catalytic process is also proposed.

}, keywords = {glycols, Nanostructure, One-pot synthesis, ruthenium (Ru), selective conversion of glucose, tungsten oxide (W18O49)}, doi = {10.1021/acsanm.3c04200}, author = {Patil, Manoj Krishnat and Gaikwad, Supriya Hanmant and Kirali, Arun Arunima Balachandran and Marimuthu, Banu and Mukherjee, Shatabdi Porel} } @article {49121, title = {Enhanced catalytic conversion of disaccharides to propylene glycol using metal-supported graphitic carbon nitride}, journal = {Energy and Fuels}, volume = {38}, year = {2024}, month = {MAR }, pages = {7005-7017}, type = {Article}, abstract = {

Propylene glycol (or) 1,2-propanediol (1,2-PD) is an important polyol widely used for pharmaceuticals, polyester resins, paints, cosmetics, antifreeze, etc. Sucrose has emerged as a promising feedstock to produce 1,2-PD, as indicated by recent research findings. Graphitic carbon nitride (g-C3N4/gCN) was synthesized by using different crucibles. Ni-Mo was loaded on different g-C3N4 supports via the wetness impregnation method for sucrose hydrogenolysis. Effects of different g-C3N4 supports were studied. Catalysts with varying Ni (x = 0-8 wt \%) and Mo (y = 0-15 wt \%) contents were characterized using XRD, BET, XPS, FE-SEM, Py-FTIR, HR-TEM, TPD (CO2)and Raman spectroscopy. An attempt was made on sucrose conversion into 1,2-PD using a Ni-Mo/g-C3N4 catalyst. The catalyst containing 8\% Ni and 10\% Mo on Gr-gCN exhibited the best performance, achieving complete sucrose conversion with a 76\% yield of 1,2-PD under mild reaction conditions. The presence of highly dispersed nanoparticles and the nature of graphitic carbon nitride help improve the reactions{\textquoteright} yield by allowing reactions at lower temperatures, reducing the occurrence of side reactions, and increasing recycling rates. A straightforward approach to material preparation, coupled with the exceptional dispersion of metal nanoparticles, paves the way for a novel platform for biomass conversion.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.3c05087}, author = {Kirali, Arun Arunima Balachandran and Narayanan, Hariprasad and Viswanathan, Balasubramanian and Yadav, Parmeshwar and Marimuthu, Banu} }