@article { ISI:000285674000014, title = {Investigations of magnetic and dielectric properties of cupric oxide nanoparticles}, journal = {Solid State Communications}, volume = {151}, number = {1}, year = {2011}, month = {JAN}, pages = {55-60}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Cupric oxide nanoparticles of similar to 8-10 nm width and 40-45 nm length self assembled as large particles similar to 1-1 5 mu m have been investigated in the 10-325 K temperature range using magnetic and dielectric measurements In magnetic measurements a single broad peak at similar to 230 K in a zero field cooled sample has been observed Coercivity in magnetization measurements at 10 K suggests that the nanoparticles are core-shell type particles with an antiferromagnetic core and a ferromagnetic shell Dielectric measurements at various frequencies from 3 7 Hz to 949 kHz exhibit a sharp peak at 284 K followed by weak anomalies around 213 and 230 K (C) 2010 Elsevier Ltd All rights reserved

}, keywords = {CuO nanoparticles, Dielectric, Ferroelectric transition, Ferromagnetic}, issn = {0038-1098}, doi = {10.1016/j.ssc.2010.10.024}, author = {Bhalerao-Panajkar, Rohini S. and Shirolkar, Mandar M. and Das, Raja and Maity, Tuhin and Poddar, Pankaj and Kulkarni, S. K.} } @article { ISI:000308631300056, title = {Observation of enhanced dielectric coupling and room-temperature ferromagnetism in chemically synthesized BiFeO3@SiO2 core-shell particles}, journal = {Journal of Physical Chemistry C}, volume = {116}, number = {36}, year = {2012}, month = {SEP}, pages = {19503-19511}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We report the effect of SiO2 coating on the structural, magnetic, and dielectric properties of chemically synthesized high-purity BiFeO3 particles. The assynthesized BiFeO3 particles demonstrate properties comparable with those reported for bulk BiFeO3. On the other hand, the structural measurement on BiFeO3@SiO2 shows that the SiO2 coating has anisotropically compressed the lattice of BiFeO3 particles and stimulates the variation in the electron density. This affects magnetic and dielectric behavior of material. Frequency-dependent dielectric constant study at low temperature (20-325 K) revealed slight reduction (8-10\%) in the dielectric constant of BiFeO3@SiO2 particles compared to uncoated BiFeO3 particles. The study reveals five anomalies at 234, 206, 146, 84, and 25 K located in close proximity to the linear magnetodielectric coupling and spin reorientation transitions. The loss tangent (approximate to 10(-3)) and alternating current (ac) conductivity (approximate to 10(-8) Omega(-1)cm(-1)) of BiFeO3@SiO2 particles are orders of magnitude lower than those observed for the BiFeO3 particles. The magnetic measurement shows the existence of room-temperature ferromagnetism in BiFeO3@SiO2 particles with average value of magnetic moment per Fe atom approximate to 0.030 mu(B) and appreciable coercivity as high as 120 Oe. The canted spin structure in the surface shell of BiFeO3@SiO2 particles show an enhanced magnetic property and shifted hysteresis loop. The magnetic measurement in close proximity to dielectric transitions revealed enhanced magnetization, suggesting the presence of anisotropies. It has been observed that SiO2 coating alters the properties of BiFeO3 particles. Our dielectric and magnetic measurements show enhanced coupling among the electric and magnetic ordered parameters in BiFeO3@SiO2 core-shell particles compared to uncoated BiFeO3 particles. The magnetic and dielectric properties of SiO2-coated BiFeO3 are similar to nanoparticles of BiFeO3 where interface plays a significant role.

}, issn = {1932-7447}, doi = {10.1021/jp3025683}, author = {Shirolkar, Mandar M. and Das, Raja and Maity, Tuhin and Poddar, Pankaj and Kulkarni, Sulabha K.} } @article { ISI:000378715600028, title = {High hydroxide conductivity in a chemically stable crystalline metal-organic framework containing a water-hydroxide supramolecular chain}, journal = {Chemical Communications}, volume = {52}, number = {54}, year = {2016}, month = {JUN}, pages = {8459-8462}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A chemically stable cationic MOF encapsulating an in situ formed water-hydroxide supramolecular anionic chain is realized for high hydroxide (OH-) ion conductivity in the solid-state (Type A). High OH- ion conductivity and low activation energy of the MOF demonstrate the advantage of the in situ incorporation of OH- ions to achieve efficient OH- ion conduction in the solid-state.

}, issn = {1359-7345}, doi = {10.1039/c6cc04436k}, author = {Nagarkar, Sanjog S. and Anothumakkool, Bihag and Desai, Aamod V. and Shirolkar, Mandar M. and Kurungot, Sreekumar and Ghosh, Sujit K.} } @article {43846, title = {Enhanced proton conduction by post-synthetic covalent modification in a porous covalent framework}, journal = {Journal of Materials Chemistry A}, volume = {5}, year = {2017}, month = {JUL}, pages = {13659-13664}, type = {Article}, abstract = {A highly chemically stable porous covalent framework (PCF-1) based on ether linkages has been synthesized, which exhibits no loss up to similar to 500 degrees C along with retention of integrity under acidic, basic and oxidative reagent conditions. Owing to its thermal and chemical stability, post-synthetic covalent modification was executed for the introduction of pendant sulphonic acid (-SO3H) groups. The covalently modified compound (PCF-1-SO3H) presents a remarkably high conductivity (ca. 0.026 S cm(-1)), with an similar to 130 fold enhancement in proton conductivity over the parent compound. This value is comparable with those of commercially used Nafion-based proton conducting materials and stands as the highest known value in the regime of post-synthetically modified porous organic frameworks. It is noteworthy to mention that PCF-1 is stable in both acidic and alkaline media, which is not commonly observed for most of the porous materials trialed as proton conducting materials, including metal organic frameworks.}, doi = {10.1039/c7ta00964j}, author = {Samanta, Partha and Desai, Aamod V. and Anothumakkool, Bihag and Shirolkar, Mandar M. and Karmakar, Avishek and Kurungot, Sreekumar and Ghosh, Sujit K.} } @article {47681, title = {Magnetic and magnetoelastic properties of Ni-substituted cobalt ferrite}, journal = {IEEE Magnetics Letters}, volume = {12}, year = {2021}, month = {JAN}, pages = {2504205}, type = {Article}, abstract = {In this letter, magnetic and magnetostriction studies were performed on spinel ferrite Co1-xNixFe2O4 (CNF series) with 0.0 < x < 0.5. All the samples were synthesized by the conventional ceramic method and confirmed to be forming pure spinel phase. The unit cell parameter showed gradual decrease with increasing Ni content. A linear decrease in saturation magnetization (M-s) and coercivity (H-c) was observed with increasing Ni substitution, which could be attributed to reduced magneto-crystalline anisotropy. The room temperature magnetostriction studies revealed a slow decrease in maximum magnetostriction, and interestingly, for 20\% reduction of cobalt concentration, i.e., for x = 0.2, a magnetostrictive strain of -164 ppm and substantially high stress sensitivity of -56 x 10(-6) A(-1) m were observed, making Co0.8Ni0.2Fe2O4 suitable for application as a magnetostrictive stress-sensing material.}, keywords = {Ferrite, Magnetism in solids, Magnetostriction, oxide, stress sensing}, issn = {1949-307X}, doi = {10.1109/LMAG.2021.3120942}, author = {Bhame, Shekhar D. and Shirolkar, Mandar M. and Joy, Pattayil A.} } @article {48085, title = {Magnetostriction studies on transition metal substituted cobalt ferrite}, journal = {Journal of the Indian Chemical Society}, volume = {99}, year = {2022}, month = {AUG}, pages = {100599}, type = {Article}, abstract = {

Structural, magnetic and microstructural properties of transition metal (TM) substituted cobalt ferrite Co0.9TM0.1Fe2O4 (where TM = Ti, Cr, Mn, Ni and Cu and Zn) were investigated. The present study shows marked dependence of the magnetostriction on the concentration of the substituted transition metal ions for Cobalt in CoFe2O4. The magnetic characteristics of the prepared compositions such as coercivity, anisotropy constant and saturation magnetization changed significantly on transition metal substitution. The present study shows the way to tune the anisotropy of cobalt ferrite by effective substitution of other transition metal ions for Co which subsequently affects the stress sensing performance by changing the slope of the magnetostriction curve. Apart from the magnetic properties the microstructure can also be effectively modified by substitution of other transition metal ions. Only 10\% substitution of cobalt showed drastic influence on magnetostriction and slope of magnetostriction curve. The composition with 10\% nickel Co0.9Ni0.1Fe2O4 exhibited maximum slope for the magnetostriction curve of -53.7 ppm/Oe, along with reasonably high magnitude of strain of 186 ppm making it a suitable for exploring stress sensing applications.

}, keywords = {Ferrite, Magnetoelastic, Magnetostriction, oxide, stress sensing}, issn = {0019-4522}, doi = {10.1016/j.jics.2022.100599}, author = {Bhame, D. Shekhar and Bhapkar, Abhishek and Shirolkar, Mandar M. and Joy, Pattayil A.} } @article {48144, title = {Trap inlaid cationic hybrid composite material for efficient segregation of toxic chemicals from water}, journal = {Angewandte Chemie-International Edition}, volume = {61}, year = {2022}, month = {AUG }, pages = {e202203385}, type = {Article}, abstract = {

Metal-based oxoanions are potentially toxic pollutants that can cause serious water pollution. Therefore, the segregation of such species has recently received significant research attention. Even though several adsorbents have been employed for effective management of chemicals, their limited microporous nature along with non-monolithic applicability has thwarted their large-scale real-time application. Herein, we developed a unique anion exchangeable hybrid composite aerogel material (IPcomp-6), integrating a stable cationic metal-organic polyhedron with a hierarchically porous metal-organic gel. The composite scavenger demonstrated a highly selective and very fast segregation efficiency for various hazardous oxoanions such as, HAsO42-, SeO42-, ReO4-, CrO42-, MnO4-, in water, in the presence of 100-fold excess of other coexisting anions. The material was able to selectively eliminate trace HAsO42- even at low concentration to well below the As-v limit in drinking water defined by WHO.

}, keywords = {Aerogel, Chemical Separation, Hybrid composite, Metal-Organic Gel, Metal-Organic Polyhedra}, issn = {1433-7851}, doi = {10.1002/anie.202203385}, author = {Fajal, Sahel and Mandal, Writakshi and Mollick, Samraj and More, Yogeshwer D. and Torris, Arun and Saurabh, Satyam and Shirolkar, Mandar M. and Ghosh, Sujit K.} } @article {48153, title = {Trap inlaid cationic hybrid composite material for efficient segregation of toxic chemicals from water (vol 61, e202203385, 2022)}, journal = {Angewandte Chemie-International Edition}, volume = {61}, year = {2022}, month = {OCT}, pages = {e202212921}, type = {Correction}, issn = {1433-7851}, doi = {10.1002/anie.202212921}, author = {Fajal, Sahel and Mandal, Writakshi and Mollick, Samraj and More, Yogeshwer D. and Torris, Arun and Saurabh, Satyam and Shirolkar, Mandar M. and Ghosh, Sujit K.} } @article {49428, title = {Nano-springe enriched hierarchical porous MOP/COF hybrid aerogel: efficient recovery of gold from electronic waste}, journal = {Angewandte Chemie-International Edition}, year = {2024}, month = {NOV}, type = {Article; Early Access}, abstract = {

Extraction of gold from secondary resources such as electronic waste (e-waste) has become crucial in recent times to compensate for the gradual scarcity of the noble metal in natural mines. However, designing and synthesizing a suitable material for highly efficient gold recovery is still a great challenge. Herein, we have strategically designed rapid fabrication of an ionic crystalline hybrid aerogel by covalent threading of an amino-functionalized metal-organic polyhedra with an imine-linked chemically stable covalent organic framework at ambient condition. The hierarchically porous ultra-light aerogel featuring imine-rich backbone, high surface area, and cationic sites have shown fast removal, high uptake capacity (2349 mg/g), and excellent selectivity towards gold sequestration. Besides, the aerogel can extract ultra-trace gold-ions from different terrestrial water bodies, aiming towards safe drinking water. This study demonstrates the great potential of the composite materials based on a novel approach to designing a hybrid porous material for efficient gold recovery from complex water matrices.

}, keywords = {Aerogel, COF, E-waste, Gold, MOP}, issn = {1433-7851}, doi = {10.1002/anie.202419830}, author = {Majumder, Dipanjan and Fajal, Sahel and Shirolkar, Mandar M. and Torris, Arun and Banyla, Yashasvi and Biswas, Kishalay and Rasaily, Sagarmani and Ghosh, Sujit K.} } @article {49236, title = {Nanotrap infused ultrathin hybrid composite material for rapid and highly selective entrapment of 99TcO4-}, journal = {CHEMICAL SCIENCE}, volume = {15}, year = {2024}, month = {NOV}, pages = {18463-18475}, type = {Journal Article}, keywords = {Adsorption, CAPTURE, EFFICIENT, Metal-organic framework, Removal, TECHNETIUM}, issn = {2041-6520}, doi = {10.1039/d4sc04010d}, author = {Mandal, Writakshi and Fajal, Sahel and Majumder, Dipanjan and Sengupta, Arijit and Let, Sumanta and Urkude, Rajashri R. and Shirolkar, Mandar M. and Torris, Arun and Ghosh, Sujit K.} } @article {49081, title = {Ultralight crystalline hybrid composite material for highly efficient sequestration of radioiodine}, journal = {Nature Communications }, volume = {15}, year = {2024}, month = {FEB }, type = {Article}, abstract = {

Considering the importance of sustainable nuclear energy, effective management of radioactive nuclear waste, such as sequestration of radioiodine has inflicted a significant research attention in recent years. Despite the fact that materials have been reported for the adsorption of iodine, development of effective adsorbent with significantly improved segregation properties for widespread practical applications still remain exceedingly difficult due to lack of proper design strategies. Herein, utilizing unique hybridization synthetic strategy, a composite crystalline aerogel material has been fabricated by covalent stepping of an amino-functionalized stable cationic discrete metal-organic polyhedra with dual-pore containing imine-functionalized covalent organic framework. The ultralight hybrid composite exhibits large surface area with hierarchical macro-micro porosity and multifunctional binding sites, which collectively interact with iodine. The developed nano-adsorbent demonstrate ultrahigh vapor and aqueous-phase iodine adsorption capacities of 9.98 g.g-1 and 4.74 g.g-1, respectively, in static conditions with fast adsorption kinetics, high retention efficiency, reusability and recovery. The development of effective adsorbents of radioiodine nuclear waste remains difficult due to the lack of proper material design strategies. Here the authors report an ultralight hierarchically porous crystalline multifunctional hybrid nanocomposite for ultrafast entrapment of iodine and polyiodide species under both static and dynamic condition.

}, doi = {10.1038/s41467-024-45581-9}, author = {Fajal, Sahel and Mandal, Writakshi and Torris, Arun and Majumder, Dipanjan and Let, Sumanta and Sen, Arunabha and Kanheerampockil, Fayis and Shirolkar, Mandar M. and Ghosh, Sujit K.} }