@article { ISI:000239884300028, title = {Theoretical study of N2O reduction by CO in Fe-BEA zeolite}, journal = {Chemphyschem}, volume = {7}, number = {8}, year = {2006}, month = {AUG}, pages = {1795-1801}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, abstract = {

Quantum mechanical (QM) and QM/molecular mechanics (MM) studies of the full catalytic cycle of N2O reduction by CO in Fe-BEA zeolite, that is, oxidation of BEA-Fe by NO and reduction of BEA-Fe-alpha O by CO, is presented. A large QM cluster, representing half of the channel of the BEA zeolite, is used. The contribution of the MM embedding to the calculated activation energies is found to be negligible. The minimum-energy paths for N2O decomposition and reduction with CO are calculated using the nudged elastic bond (NEB) method. Calculated band experimental activation energies ore in good agreement The two possible orientations for the gaseous molecules adsorbing on the Fe site that ore found lead to different activation energies.

}, keywords = {Density functional calculations, iron, nitrogen oxides, reaction mechanisms, zeolites}, issn = {1439-4235}, doi = {10.1002/cphc.200600228}, author = {Fischer, Gerd and Goursot, Annick and Coq, Bernard and Delahay, Gerard and Pal, Sourav} } @article { ISI:000253521600009, title = {Iron-nickel bimetallic nanoparticles for reductive degradation of azo dye orange G in aqueous solution}, journal = {Applied Catalysis B-Environmental}, volume = {79}, number = {3}, year = {2008}, month = {MAR}, pages = {270-278}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The degradation of Orange G, a monoazo dye, in aqueous solutions was investigated using Fe-Ni bimetallic nanoparticles. Transmission electron microscopy (TEM) of as-synthesized nanoparticles showed the presence of spherical particles having a size of 20-40 nm. X-ray photoelectron spectroscopy (XPS) did not detect the presence of nickel on the nanoparticle surface, which suggested a uniform distribution of both metals inside the particle core. Batch experiments with a minimum nanocatalyst loading of 3 g/L showed complete dye degradation after 10 min of reaction time. The degradation efficiency was linearly dependent on the initial dye concentration, pH of the solution and total Fe-Ni catalyst concentration. The efficiency increased with increasing Fe-Ni concentration and decreasing pH of the solution, but decreased with an increase in the dye concentration. The degradation rate followed first order reaction kinetics with respect to the dye concentration. High performance liquid chromatography-mass spectrometry (HPLC-MS) analysis of the degradation products revealed that the degradation mechanism proceeds through a reductive cleavage of the azo linkage resulting in the formation of aniline and surface-adsorbed naphthol amine derivatives. The latter are subsequently hydroxylated through an oxidative process. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Azo Dye, Degradation, iron, Nanoparticles, Nickel}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2007.10.033}, author = {Bokare, Alok D. and Chikate, Rajeev C. and Rode, Chandrashekhar V. and Paknikar, Kishore M.} } @article { ISI:000281125800003, title = {Structure-function mimicry of oxidized purple acid phosphatase-PAP(ox)-A new functional model}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {49}, number = {8}, year = {2010}, month = {AUG}, pages = {1023-1029}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

{Electronic structure and spectroscopic properties of the novel diiron active site of oxidized mammalian purple acid phosphatase analogues, Fe-6: [Fe-2 (mu-O) (mu-OAc) (4HNSQ(ox))(2 center dot-)(ONSQ(ox))(2 center dot-)(H2O)(4)] and Fe-7: [Fe-2 (mu-O) (mu-OAc)(ONSQ(ox))(2 center dot-)(OAc) (H2O)(4)] are described. Magnetic susceptibility SQUID data of Fe-6 are best fitted to Heisenberg{\textquoteright}s isotropic spin pair (S = 5/2, 3/2) model using magnetic parameters g = 2 and J = - 36.8 cm(-1) with R factor = 6.4 x 10(-4). The antiferromagnetic exchange establishes Fe(III)-O-Fe(III) dimeric core with Fe(III) site having two radical ligations in the naphthosemiquinone oxime form of lawsone oxime. In the model compound Fe-7 of oxidized purple acid phosphatase, bridged and terminal acetate functions are identified according to their different energies of activations, i.e, similar to 34 and 58 kJ mol(-1) respectively. Also, the reduced naphthoquinone oxime form of ligand is characterized by its energy of activation (similar to 15 kJ mol(-1)) from pyrolytic reaction. Mossbauer parameters

}, keywords = {Antiferromagnetic exchange, Bioinorganic chemistry, DNA cleavage, iron, Nuclease activity, PAP(ox) analogues}, issn = {0376-4710}, author = {Waghmode, Shobha A. and Date, Sadgopal K. and Gupta, Vidya S. and Rane, Sandhya Y.} } @article { ISI:000336351800043, title = {Solar photocatalytic degradation of methylene blue using doped TiO2 nanoparticles}, journal = {Solar Energy}, volume = {103}, year = {2014}, month = {MAY}, pages = {473-479}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Doped-TiO2 nanoparticles (M:TiO2: Fe, Zn, Zr, Sb, Ce and nM:TiO2: B, C, N, P, S) with anatase structure were prepared by sol-gel method and characterized by X-ray diffraction (XRD), Transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Brunauer-Teller method (BET), UV-Vis diffuses reflectance spectroscopy (DRS). Results revealed that the anatase structure is highly stable for all doped TiO2 prepared compounds with enhancement in the surface area. UV-Vis diffuse reflectance spectra showed that these dopants were responsible for narrowing the band gap of TiO2 and shifting its optical response from ultraviolet to visible-light region. The photocatalytic activities of these multi-doped TiO2 catalysts were investigated by degradation methylene blue in aqueous solution under solar-light illumination. The results showed an appreciable enhancement in the photoactivity of the C-doped TiO2 as compared to other multi-doped TiO2 because of the formation of Ti+3 species which prevent the recombination of electron-hole pairs in C-doped TiO2. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Carbon, iron, Methylene blue, Solar photocatalysis}, issn = {0038-092X}, doi = {10.1016/j.solener.2014.02.043}, author = {Bhosale, R. R. and Pujari, S. R. and Muley, G. G. and Patil, S. H. and Patil, K. R. and Shaikh, M. F. and Gambhire, A. B.} } @article { ISI:000352508300032, title = {Reactivity and operational stability of N-Tailed TAMLs through kinetic studies of the catalyzed oxidation of orange II by H2O2: synthesis and x-ray structure of an N-Phenyl TAML}, journal = {Chemistry A-European Journal}, volume = {21}, number = {16}, year = {2015}, month = {APR}, pages = {6226-6233}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

{The catalytic activity of the N-tailed (biuret) TAML (tetraamido macrocyclic ligand) activators [Fe{4-XC6H3-1,2-(NCOCMe2NCO)(2)NR}Cl](2-) (3; N atoms in boldface are coordinated to the central iron atom; the same nomenclature is used in for compounds 1 and 2 below), [X

}, keywords = {Hydrogen peroxide, iron, kinetics, Oxidation, reaction mechanisms}, issn = {0947-6539}, doi = {10.1002/chem.201406061}, author = {Warner, Genoa R. and Mills, Matthew R. and Enslin, Clarissa and Pattanayak, Shantanu and Panda, Chakadola and Panda, Tamas Kumar and Sen Gupta, Sayam and Ryabov, Alexander D. and Collins, Terrence J.} } @article { ISI:000377826000008, title = {Biogenic green synthesis of monodispersed gum kondagogu (Cochlospermum gossypium) iron nanocomposite material and its application in germination and growth of mung bean (Vigna radiata) as a plant model}, journal = {IET Nanobiotechnology}, volume = {10}, number = {3}, year = {2016}, month = {JUN}, pages = {141-146}, publisher = {INST ENGINEERING TECHNOLOGY-IET}, address = {MICHAEL FARADAY HOUSE SIX HILLS WAY STEVENAGE, HERTFORD SG1 2AY, ENGLAND}, abstract = {

An eco-friendly green and one-pot synthesis of highly monodispersed iron (Fe) nanoparticles (NPs) by using a natural biopolymer, gum kondagogu (GK) as reducing and capping agent is proposed. The NPs synthesised were characterised by ultra-violet-visible spectroscopy, transmission electron microscopy, scanning electron microscopy and X-ray diffraction. As the concentration of gum and time increases, the intensity of NPs formation increased. The NPs were highly monodispersed with uniform circular shapes of 2-6 nm in size. The formed NPs were crystalline in nature which was confirmed by diffraction analysis. The conversion ratio of Fe ionic form to NPs was 21\% which was quantified by inductively coupled plasma mass spectroscopy (ICP-MS). Fe is essential for plant growth and development. A study was conducted to examine the effect of these NPs on the growth of mung bean (Vigna radiata). The radical length and biomass was increased in seeds exposed to Fe NPs than the ions. The uptake of Fe NPs by the sprouts was also quantified by ICP-MS, in which Fe was more in mung bean seeds exposed to NPs. The -amylase activity was increased in the seeds exposed to NPs. The observed increase in the biomass by Fe NPs and seed germination may facilitate its application in the agriculture as an important cost-effective method for plant growth.

}, keywords = {alpha-amylase activity, Biogenic green synthesis, biological techniques, Biomass, Cochlospermum gossypium, diffraction analysis, enzymes, Fe, gum concentration, high-monodispersed iron nanoparticles, inductively coupled plasma mass spectroscopy, ionic-to-nanoparticle iron conversion ratio, iron, monodispersed gum kondagogu, monodispersed gum kondagogu iron nanocomposite material, mung bean germination, mung bean growth, Nanobiotechnology, Nanocomposites, nanoparticle formation, Nanoparticles, natural biopolymer, plant growth, plant model, scanning electron microscopy, size 2 nm to 6 nm, transmission electron microscopy, ultraviolet spectra, ultraviolet-visible spectroscopy, Vigna radiata, visible spectra, X-ray diffraction}, issn = {1751-8741}, doi = {10.1049/iet-nbt.2015.0112}, author = {Raju, Dugyala and Mehta, Urmil J. and Beedu, Sashidhar Rao} } @article {46796, title = {Anthrone-spirolactam and quinoline hybrid based sensor for selective fluorescent detection of Fe(3+)ions}, volume = {34}, year = {2020}, month = {OCT}, pages = {e5867}, type = {Article}, abstract = {

The synthesis of a novel, and highly selective Fe(3+)ion sensor based on anthrone-spirolactam and its quinoline hybrid ligand is reported. The designed ligand displayed selective detection of Fe(3+)ions with enhanced fluorescence emission. The complexation of Fe(3+)ion led to a red shift of 32 nm from 420 nm to 452 nm, and a several fold increase in intensity with fluorescent green emission. The complexation (detection) of Fe(3+)ions with ligand resulted in chelation enhanced fluorescence and intramolecular charge transfer through the inhibition of C=N isomerization. This hybrid sensor shows high sensitivity and selectivity, spontaneous response, and works on a wide pH range a minimum detection limit of 6.83 x 10(-8)M. Importantly, the sensor works through the fluorescence turn-on mechanism that overcomes the paramagnetic effect of Fe(3+)ions. The binding mechanism between the ligand and the Fe(3+)ions was established from the Job{\textquoteright}s plot method, optical studies, Fourier transfor infrared spectroscopy, NMR titration, fluorescence life-time studies, and density functional theory optimization. The sensor displayed excellent results in the quantification of Fe(3+)ions from real water samples. Furthermore, due to its biocompatibility nature, fluorescent spotting of Fe(3+)ions in live cells revealed its bioimaging applications.

}, keywords = {anthrone-spirolactam-quinoline, Cell imaging, fluorescence, intramolecular charge transfer, iron}, issn = {0268-2605}, doi = {10.1002/aoc.5867, Early Access Date = JUL 2020}, author = {Darole, Ratanamala S. and Christopher Leslee, Denzil Britto and Mukherjee, Anagh and Gonnade, Rajesh G. and Karuppannan, Sekar and Senthilkumar, Beeran} } @article {46798, title = {Iron-catalyzed C(sp(2))-H alkylation of indolines and benzo[h]quinoline with unactivated alkyl chlorides through chelation assistance}, journal = {ACS Catalysis}, volume = {10}, year = {2020}, month = {JUL }, pages = {7312-7321}, type = {Article}, abstract = {

Regioselective C-H bond alkylation of indolines and benzo[h]quinoline with a wide range of unactivated and highly demanded primary and secondary alkyl chlorides is accomplished using a low-cost iron catalyst. This reaction tolerates diverse functionalities, such as C(sp(2))-Cl, fluoro, alkenyl, silyl, ether, thioether, pyrrolyl, and carbazolyl groups including cyclic and acyclic alkyls as well as alkyl-bearing fatty-alcohol and polycyclic-steroid moieties. The demonstrated iron-catalyzed protocol proceeded via either a five-membered or a six-membered metallacycle. Intriguingly, the C-7-alkylated indolines can be readily functionalized into free-NH indolines/indoles and tryptamine derivatives. A detailed mechanistic investigation highlights the participation of an active Fe(I) catalyst and the involvement of a halogen-atom transfer process via a single-electron-based mechanism. Deuterium labeling and kinetics analysis indicate that the C-H metalation of indoline is the probable turnover-limiting step. Overall, the experimental and theoretical studies supported an Fe(I)/Fe(III) pathway for the alkylation reaction comprising the two-step, one-electron oxidative addition of alkyl chloride.

}, keywords = {alkyl chlorides, Alkylation, C-H activation, chelation assistance, indolines, iron}, issn = {2155-5435}, doi = {10.1021/acscatal.0c02030}, author = {Jagtap, Rahul A. and Samal, Pragnya Paramita and Vinod, C. P. and Krishnamurty, Sailaja and Punji, Benudhar} } @article {47094, title = {Promoted mesoporous Fe-alumina catalysts for the non-oxidative dehydrogenation of isobutane}, journal = {Catalysis Communications}, volume = {150}, year = {2021}, month = {FEB}, pages = {106263}, type = {Article}, abstract = {

Production of isobutene is commercially consequential and highly demanding from the end-use industries being a key platform molecule as well as an intermediate for a variety of value-added chemicals. Traditionally, isobutene is prepared via steam cracking and fluid catalytic cracking methods. However, the catalysts used in these conventional methods have disadvantages like coke formation, sintering, etc. In this study, the catalytic non-oxidative dehydrogenation of isobutane over acidic, alkaline, and noble metal promoted mesoporous iron-doped catalysts was investigated. Iron doping has a significant function in controlling isobutene selectivity. The synthesis method is crucial to achieve successful metal doping in the mesoporous alumina matrix. Promoted catalysts exhibited a notable difference in isobutane conversion with a marginal change in dehydrogenation selectivity. Silver promoted catalyst showed slightly higher isobutene yield due to the optimal catalytic properties. This catalyst was stable for a considerable duration, and coke deposition, as well as particle agglomeration, were observed to faintly inhibit the catalytic activity.

}, keywords = {iron, Isobutane, Isobutene, Mesoporous alumina, Non-oxidative dehydrogenation}, issn = {1566-7367}, doi = {10.1016/j.catcom.2020.106263}, author = {Venugopalan, Aswathy Thareparambil and Kandasamy, Prabu and Gupta, Nikitra Nihalchand and Thirumalaiswamy, Raja} } @article {47076, title = {Utilizing the oxygen carrier property of cerium iron oxide for the low-temperature synthesis of 1,3-butadiene from 1-butene}, journal = {Catalysis Letters}, volume = {151}, year = {2021}, month = {OCT}, pages = {3057-3066}, type = {Article}, abstract = {

Low-temperature oxidative dehydrogenation (ODH) of 1-butene to 1,3-butadiene is one of the challenging reactions in the polymer industry. Towards this a highly dispersed cerium iron oxide was synthesized by citrate gel combustion method and employed for the synthesis of 1,3-butadiene (BD) from 1-butene. The reaction was carried out at low temperature under an oxygen-free atmosphere in a continuous flow mode fixed bed reactor. A decrease in the lattice parameters observed from PXRD and high-resolution TEM analysis proved that iron occupies cerium sites in the crystal lattice. XPS, TPR, and oxygen uptake studies quantified the nature and abundance of different oxygen species. ODH was observed through consuming lattice oxygens. The vacancies generated could be filled by re-oxidation with an external supply of oxygen which will restore the catalytic activity demonstrating the Mars van Krevelen mechanism. [GRAPHICS] .

}, keywords = {1, 1-butene, 3-butadiene, Cerium, iron, Lattice oxygen, oxidative dehydrogenation}, issn = {1011-372X}, doi = {10.1007/s10562-020-03512-5, Early Access Date = FEB 2021}, author = {Venugopalan, Aswathy T. and Kandasamy, Prabu and Gogoi, Pranjal and Ratneshkumar, Jha and Thirumalaiswamy, Raja} } @article {47895, title = {Catalytic activity of CuFe2O4 spinel oxide for liquid-phase oxidation of cinnamyl alcohol}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {FEB}, pages = {e202104441}, type = {Article}, abstract = {

CuFe2O4 spinel oxide catalyst was synthesized by sol-gel and co-precipitation methods for liquid phase oxidation of Cinnamyl alcohol (CnOH) to Cinnamaldehydes (CnHO) using tert-Butyl hydroperoxide (TBHP) as oxidising agent. Spinel oxide catalyst was characterized by different techniques such as X-ray diffraction (XRD), N-2 adsorption-desorption, BET surface area, and X-ray photoelectron spectroscopy (XPS) to understand the structural, physical properties and oxidation state of the catalyst. The result shows that catalyst prepared by sol-gel method was found higher surface area and smaller crystalline size than co-precipitation method. XPS data confirm the formation of Cu2+ in the spinel which helps to improve the catalytic activity of oxidation. This reaction follows radical mechanism, and exhibited 76.7 \% of CnOH conversion and 68.4 \% of CnHO, and 24.8 \% benzaldehyde (benzald) selectivity using TBHP at 60 degrees C. Kinetic data reveal that 41.2 kJ/mol of activation energy for the reaction. The higher activity of spinel oxide catalyst could be due synergetic effect of spinel (88 \%) and oxides (12 \%) formed in the catalyst, which helps to provide the oxygen during reaction. The contribution of Cu2+ is higher in sol-gel than co-precipitation, which may provide the better reactivity of catalyst. This work helps to select the effective and cost-effective catalyst for the oxidation of CnOH.

}, keywords = {Catalysts, Cinnamaldehyde, Cinnamyl Alcohol, Cupper, iron, oxide, spinel}, issn = {2365-6549}, doi = {10.1002/slct.202104441}, author = {Dange, Rutvija M. and Niphadkar, Prashant S. and Bokade, Vijay V. and Nandanwar, Sachin U.} } @article {48083, title = {Efficient route to 3,3 {\textquoteleft}-biindolinylidene-diones by iron-catalyzed dimerization of isatins}, journal = {Chemistry-an Asian Journal}, volume = {17}, year = {2022}, month = {AUG}, pages = {e202200414}, type = {Article}, abstract = {

Iron-catalyzed dimerization of various isatin derivatives is described for the efficient synthesis of 3,3 {\textquoteleft}-biindolinylidene-diones (isoindigos). The reaction provides easy access to self-coupled and cross-coupled 3,3 {\textquoteleft}-indolinylidene-diones that have high relevance to biology and materials. This Fe(0)- or Fe(II)-catalyzed dimerization reaction tolerates a wide range of functionalities, such as fluoro, chloro, bromo, alkenyl, nitrile, ether, ester, pyrrolyl, indolyl and carbazolyl groups, including cyclic and acyclic alkyls as well as an alkyl-bearing fatty-alcohol moiety. Especially, the coupling between two distinct isatins provided excellent selectivity for the cross-dimerization with trace of self-couplings. The single-crystal X-ray diffraction study established the molecular structure of eight dimerized products. A preliminary mechanistic study of the Fe-catalyzed dimerization supported the radical pathway for the reaction.

}, keywords = {Cross-coupling, dimerization, iron, Isatin, Isoindigo, Mechanism}, issn = {1861-4728}, doi = {10.1002/asia.202200414}, author = {Jagtap, Rahul A. and Pradhan, Chandini and Gonnade, Rajesh G. and Punji, Benudhar} } @article {49125, title = {Advances in the iron-catalyzed direct functionalizations of heterocycles}, journal = {Synlett}, volume = {34}, year = {2023}, month = {APR}, pages = {683-697}, type = {Article}, abstract = {

Direct functionalization of heterocycles is an advanced strategy for diversifying privileged and biorelevant heterocycle-containing molecules. Particularly, use of the most abundant transition metal, iron, as a catalyst makes this process highly cost-effective and sustainable. Recently, some progress has been realized towards the direct functionalization of heterocycles under iron catalysis. Herein, we present the developments in the C-H bond functionalizations and related reactions of various heterocycles by abundant iron salts. This Synpacts is categorized into different sections based on heterocycles being functionalized, and each section is discussed based on the type of reaction catalyzed by iron. 1 Introduction 2 Functionalization of Indoles 2.1 Alkylation 2.2 Alkenylation 2.3 Other Reactions 3 Oxindoles and isatins 3.1 C-C Bond Formation 3.2 C-Heteroatom Bond Formation 4 Pyridines and Furans 5 Functionalization of Azoles 6 Summary and Outlook

}, keywords = {Alkylation, azoles, C-H functionalization, heterocycles, indoles, iron, Mechanism}, issn = {0936-5214}, doi = {10.1055/a-1890-8503}, author = {Pradhan, Chandini and Punji, Benudhar} } @article {49366, title = {Iron-catalyzed C-C and C-N bond-forming tandem amidation offering access to 3-amino-3-aminomethyl-2-oxindole frameworks}, journal = {Advanced Synthesis \& Catalysis}, volume = {366}, year = {2024}, month = {JUN }, pages = {2801-2810}, type = {Article}, abstract = {

An iron-catalyzed protocol for the synthesis of 3-amino-3-aminomethyl-2-oxindole heterocyclic structures is disclosed employing isatins and non-nucleophilic N-methoxybenzamides. This reaction class is associated with broad scope and tolerates numerous functionalities, such as fluoro, chloro, bromo, iodo, trifluoromethyl, nitrile, ester, ether, and alkenyl, including heteroaryl - thiophene, benzothiophene, carbazolyl, indolyl, eugenol, and polycyclic cholesterol moieties. Detailed mechanistic investigations reveal that the reaction proceeds via iron-catalyzed N-O bond cleavage in N-methoxybenzamides, generating formaldehyde and benzamide, and through the intermediacy of isatin-ketimines and N-(hydroxymethyl)benzamides. Overall, this amidation reaction involves one C-C and two C-N bond-forming tandem processes, providing a range of beta-amino-aminomethyl-oxindoles (45 examples) in up to 88\% yields. image

}, keywords = {benzamide, iron, Isatin, tandem amidation, tetrasubstituted carbon stereocenter}, issn = {1615-4150}, doi = {10.1002/adsc.202400216}, author = {Ankade, Shidheshwar B. and Pradhan, Chandini and Samal, Pragnya Paramita and Gonnade, Rajesh G. and Krishnamurty, Sailaja and Punji, Benudhar} }