@article { ISI:000230521800024, title = {Simultaneous conversion of methane and methanol into gasoline over bifunctional Ga-, Zn-, In-, and/or Mo-modified ZSM-5 zeolites}, journal = {Angewandte Chemie-International Edition}, volume = {44}, number = {28}, year = {2005}, month = {JUN}, pages = {4381-4385}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, keywords = {gallium, heterogeneuos catalysis, methane activation, Molybdenum, zeolites}, issn = {1433-7851}, doi = {10.1002/anie.200500694}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Mulla, Shafeek Abdul Rashid} } @article { ISI:000311698800036, title = {One-pot sol-gel preparation for efficient cobalt-molybdenum-titania hydrotreating catalysts}, journal = {Chemcatchem}, volume = {4}, number = {12}, year = {2012}, month = {DEC}, pages = {2112-2120}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Titania-based hydrodesulfurization catalysts were prepared by using a one-pot solgel method with the titanium peroxo complex as titanium precursor and molybdenum and cobalt precursors dissolved in the aqueous hydrogen peroxide solution used during synthesis. Catalysts with MoO3 loadings varying from 5 to 40 wt?\% and a Co/Mo atomic ratio of 0.5 were prepared. Solids with molybdenum loadings below 20 wt?\% MoO3 demonstrated poor hydrodesulfurization activity for the model compound thiophene. This was attributed to the presence of a large amount of embedded cobalt and molybdenum species in the titania matrix. A significant increase in the catalytic activity was observed for solids containing 20 and 25 wt?\% of MoO3 on which active species appeared to be accessible on the titania surface. Furthermore, the highest conversion obtained on these solgel solids was superior to the highest conversion obtained on reference catalysts prepared through the impregnation of ammonium heptamolybdate and cobalt nitrate on commercial titania.

}, keywords = {cobalt, heterogeneous catalysis, Molybdenum, sol-gel process, titanium}, issn = {1867-3880}, doi = {10.1002/cctc.201200165}, author = {Nguyen, D. L. and Gillot, S. and Souza, D. O. and Blanchard, P. and Lamonier, Carole and Berrier, E. and Kotbagi, T. V. and Dongare, Mohan K. and Shubhangi B. Umbarkar and Cristol, S. and Payen, E. and Lancelot, Christine} } @article { ISI:000319680800041, title = {Isolation, characterization, and identification of catalytically active species in the MoO3/SiO2 catalyst during solid acid catalyzed reactions}, journal = {Chemcatchem}, volume = {5}, number = {6}, year = {2013}, month = {JUN}, pages = {1531-1537}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report the isolation, characterization, and identification of the catalytically active species formed during various acid-catalyzed reactions if silica-supported MoO3 was used as a catalyst. We have reported previously the synthesis and extensive characterization of the silica-supported MoO3 catalyst prepared by the sol-gel process with ammonium heptamolybdate and ethyl silicate-40 as molybdenum and silica precursors, respectively. The TEM images showed uniformly distributed MoO3 nanoparticles on the high-surface area mesoporous silica support and high acidity (0.9mmolg-1) by using temperature-programmed desorption of ammonia (NH3-TPD) analysis. This catalyst has already shown high activity for various acid-catalyzed reactions. To understand the nature of catalytically active species formed during the reaction, the liquid-phase esterification of acetic acid and ethanol was studied as a probe reaction with very high acid conversion (83\%) in 8h. During esterification, the reaction mixture turned blue, which indicated a change in the nature of the catalyst under reaction conditions. These catalytically active species formed in the reaction mixture were isolated and extensively characterized by using FTIR, Raman, powder XRD, BET surface area, NH3-TPD, energy dispersive X-ray, and TEM analysis. The characterization results revealed the insitu formation of silicomolybdic acid on the silica surface in the presence of water, which acts as catalytically active species responsible for the acid-catalyzed reactions.

}, keywords = {esterification reactions, heterogeneous catalysis, Molybdenum, silicon, sol-gel processes}, issn = {1867-3880}, doi = {10.1002/cctc.201200662}, author = {Kotbagi, Trupti V. and Biradar, Ankush V. and Shubhangi B. Umbarkar and Dongare, Mohan K.} } @article { ISI:000344470100036, title = {Molybdenum(VI) dioxo complexes for the epoxidation of allylic alcohols and olefins}, journal = {Journal of Organometallic Chemistry}, volume = {772}, year = {2014}, month = {DEC}, pages = {271-279}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Several molybdenum(VI) dioxo complexes have been investigated as catalyst precursors for allylic alcohol epoxidation using mainly hydrogen peroxide as oxidant. All catalysts proved to be efficient and selective for the epoxidation of allylic alcohols provided the olefins were rather electron rich. Indeed, electron poor substrates could be converted selectively into the corresponding unsaturated aldehydes. A chiral dioxomolybdenum complex based on an optically pure tridentate Schiff base ligand was synthesized and characterized. Though that complex provided an efficient epoxidation catalyst for allylic alcohols and olefins, no chiral induction was observed. During the X-ray diffraction analysis, the cooling at 100 K led to the appearance of super-lattice reflections on diffraction patterns reflecting an ordering of the structure. Instead of one organometallic species observed at 298 K, three similar complexes of the same molecular structure could be observed in the asymmetric unit at 100 K. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Allylic alcohol, epoxidation, Molybdenum, Oxidation, Peroxide}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2014.09.029}, author = {Pandhare, Swati L. and Jadhao, Rajesh R. and Puranik, Vedavati G. and Joshi, Pranaya V. and Capet, Frederic and Dongare, Mohan K. and Shubhangi B. Umbarkar and Michon, Christophe and Agbossou-Niedercorn, Francine} } @article { ISI:000352803900014, title = {Exfoliation of bulk inorganic layered materials into nanosheets by the rapid quenching method and their electrochemical performance}, journal = {European Journal of Inorganic Chemistry}, number = {11}, year = {2015}, month = {APR}, pages = {1973-1980}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report herein the results of our investigations on the synthesis of transition-metal dichalcogenide (TMDC) semiconductor layered materials of MoS2, WS2, MoSe2, and WSe2 by the rapid quenching method. The bulk powders were added to deionized water in a polypropylene tube and subsequently flushed with argon gas. Thirty rapid freezing (30 s in a liquid nitrogen bath) and heating (20 min in an oil bath at 60 degrees C) cycles were then carried out. The reaction product was obtained in a yield in excess of 60 wt.-\%, which indicates that the method can be utilized on an industrial scale for the production of 2D nanosheets. The as-synthesized products were then characterized by TEM, which revealed nanosheet-like morphologies. Raman spectroscopy confirmed the high quality of the nanosheet samples. The exfoliated samples also showed good electrochemical performance. Of the TMDC samples investigated, the WSe2 nanosheets were found to give the best performance due to their uniform morphology, large surface area, and fewest number of defects.

}, keywords = {chalcogenides, Electrochemistry, Layered compounds, Molybdenum, Nanostructures, Tungsten}, issn = {1434-1948}, doi = {10.1002/ejic.201500039}, author = {Chakravarty, Disha and Late, Dattatray J.} }