@article { ISI:000233062500003, title = {Role of a co-metal in bimetallic Ni-Pt catalyst for hydrogenation of m-dinitrobenzene to m-phenylenediamine}, journal = {Applied Catalysis A-General}, volume = {295}, number = {1}, year = {2005}, month = {OCT}, pages = {23-30}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Bimetallic Ni-Pt catalysts supported on carbon were found to give very high turn over frequency numbers and almost complete selectivity to m-phenylenediamine in m-dinitrobenzene hydrogenation as compared to the monometallic nickel catalysts. The XRD and XPS characterization revealed that most of the nickel remains as Ni2+ in a monometallic catalyst while, the addition of platinum leads to the stabilization of Ni-0 state, in case of bimetallic catalysts. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Bimetallic catalyst, Catalytic hydrogenation, m-dinitrobenzene, m-phenylenediamine, Selective hydrogenation, turn over number, XPS and XRD of nickel}, issn = {0926-860X}, doi = {10.1016/j.apcata.2005.07.050}, author = {Telkar, M. M. and Nadgeri, J. M. and Rode, C. V. and Chaudhari, R.} } @article { ISI:000347150700005, title = {Efficient method for the conversion of agricultural waste into sugar alcohols over supported bimetallic catalysts}, journal = {Bioresource Technology}, volume = {178}, year = {2015}, month = {FEB}, pages = {36-44}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Promoter effect of Sn in the PtSn/gamma-Al2O3 (AL) and PtSn/C bimetallic catalysts is studied for the conversion of variety of substrates such as, C5 sugars (xylose, arabinose), C6 sugars (glucose, fructose, galactose), hemicelluloses (xylan, arabinogalactan), inulin and agricultural wastes (bagasse, rice husk, wheat straw) into sugar alcohols (sorbitol, mannitol, xylitol, arabitol, galactitol). In all the reactions, PtSn/AL showed enhanced yields of sugar alcohols by 1.5-3 times than Pt/AL. Compared to C, AL supported bimetallic catalysts showed prominent enhancement in the yields of sugar alcohols. Bimetallic catalysts characterized by X-ray diffraction study revealed the stability of catalyst and absence of alloy formation thereby indicating that Pt and Sn are present as individual particles in PtSn/AL. The TEM analysis also confirmed stability of the catalysts and XPS study disclosed formation of electron deficient Sn species which helps in polarizing carbonyl bond to achieve enhanced hydrogenation activity. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Agricultural waste, Bimetallic catalyst, Hydrogenation, Monosaccharides, Polysaccharides}, issn = {0960-8524}, doi = {10.1016/j.biortech.2014.10.036}, author = {Tathod, Anup P. and Dhepe, Paresh Laxmikant} } @article {44025, title = {One pot conversion of furfural to 2-methylfuran in the presence of PtCo bimetallic catalyst}, journal = {Clean Technologies and Environmental Policy}, volume = {20}, year = {2018}, month = {MAY}, pages = {703-713}, type = {Article in Press}, abstract = {

Biomass-derived furfural (FAL) is the platform chemical for synthesis of various value-added chemicals and fuels. One of the FAL-derived chemicals, i.e., 2-methylfuran (2-MF), is the potential biofuel due to its attractive chemical and physical properties. Various methods are reported for conversion of FAL to 2-MF which are operated at high temperature and high H2 pressure. In present work, one pot catalytic method was developed in batch mode process for conversion of FAL to 2-MF. Reactions are carried out in the presence of PtCo/C bimetallic catalyst under 0.5{\textendash}1 MPa H2 pressure. Monometallic and bimetallic catalysts with different Pt and Co loading were prepared by wet impregnation method, and catalysts were characterized by transmission electron microscopy, BET surface area, X-ray photoelectron spectroscopy, X-ray diffraction and inductive coupled plasma atomic emission spectroscopy techniques. 59\% 2-MF yield was achieved at 180 {\textdegree}C and lower (0.5 MPa) H2 pressure.

}, keywords = {2-Methylfuran, Bimetallic catalyst, Co-impregnation, furfural, Hydrodeoxygenation, Hydrogenation}, doi = {10.1007/s10098-017-1408-z}, author = {Dohade, M.G. and Dhepe, P. L.} } @article {44592, title = {Ti-doped Pd-Au catalysts for one-pot hydrogenation and ring opening of furfural}, journal = {Catalysts}, volume = {8}, year = {2018}, month = {JUN}, pages = {252}, abstract = {

Pd-Au bimetallic catalysts with different Pd/Au atomic ratios, supported on ordered structured silica (Hexagonal mesoporous silica-HMS, or Santa Barbara Amorphous-15-SBA-15) were evaluated for one-pot hydrogenation of furfural to 1,2-pentanediol. The surface and structural properties of the catalysts were deeply investigated by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), N-2 adsorption isotherms (BET), Infrared spectroscopy (IR), and acid capacity measurements. XPS studies revealed that Ti doped supports had higher dispersion of the active phase, particularly in the case of Pd-Au materials in which Ti played an important role in stabilizing the metallic species. Among the various process conditions studied, such as temperature (160 degrees C), catalyst amount (10\% w/w), and reaction time (5 h), H-2 pressure (500 psi) was found to improve the 1,2-pentanediol selectivity. The SBA silica bimetallic Ti-doped system showed the best performance in terms of stability and reusability, after multiple cycles. Under specific reaction conditions, the synergism between Pd-Au alloy and Ti doping of the support allowed the ring opening pathway towards the formation of 1,2-pentanediol in furfural hydrogenation.

}, keywords = {Bimetallic catalyst, furfural, Hydrogenation, ring-opening}, issn = {2073-4344}, doi = {10.3390/catal8060252}, author = {Date, Nandan Shreehari and La Parola, Valeria and Rode, Chandrashekhar Vasant and Testa, Maria Luisa} } @article {46018, title = {Highly efficient Pt-MoOx/ZrO2 catalyst for green diesel production}, journal = {Catalysis Communications}, volume = {125}, year = {2019}, month = {MAY}, pages = {70-76}, type = {Article}, abstract = {

Bimetallic Pt-MoOx supported on ZrO2 exhibits higher catalytic activity than known catalysts for converting fatty acids into green diesel at as low as 200 degrees C. A change in selectivity from decarboxylation/decarbonylation to hydrodeoxygenation and enhancement in the deoxygenation activity of Pt were observed when MoOx was also present in the catalyst composition. In X-ray photoelectron spectra, Pt 4f lines of 4Pt-8MoO(x)/ZrO2 occurred at lower binding energies than those for 4Pt/ZrO2. Part of Mo was reduced from +6 to +5 oxidation state in the presence of Pt. There seems to exist some electronic interaction between the support and metal, making 4Pt-8MoO(x)/ZrO2 a highly efficient and selective deoxygenation catalyst.

}, keywords = {Bimetallic catalyst, Biofuel, Deoxygenation of fatty acids, Green Diesel, Hydrocarbons, Supported platinum catalyst}, issn = {1566-7367}, doi = {10.1016/j.catcom.2019.03.027}, author = {Janampelli, Sagar and Darbha, Srinivas} } @article {46738, title = {One pot hydrogenation of furfural to 2-methyl tetrahydrofuran over supported mono- and Bi-metallic catalysts}, journal = {ChemistrySelect}, volume = {5}, year = {2020}, month = {AUG }, pages = {9590-9600}, type = {Article}, abstract = {

2-Methyltetrahydrofuran is a valuable commercial product that can be obtained by direct hydrogenation of furfural. In the present study, among several carbon supported bimetallic Ir-Ni catalysts with different loadings screened, 4\% Ir-4\% Ni/C catalyst showed excellent activity in terms of direct conversion (99\%) to 2-MeTHF with a maximum selectivity of similar to 74\% at 220 degrees C and 750 psig, suppressing the formation of side chain as well as ring opening products. The catalytic activity was found to be mainly affected by catalyst preparation methods, metal loadings, surface composition, temperature, pressure and catalyst loading. HR-TEM and STEM revealed well dispersed Ir-Ni NPs having the particle sizes in the range of 2 to 5 nm. Different phases of Ir i. e. Ir degrees and IrO(2)as well as oxygen vacancies were found to be responsible for hydrogenation of furfural to 2-methyl furan while, Ni degrees and NiO were responsible for further hydrogenation to 2-MeTHF. The synergic effect between Ir and Ni was established through XPS, H-2-TPR analysis. With the help of some control experiments, the plausible reaction pathway was also proposed. The catalyst prepared by co-impregnation method found more effective than prepared by sequential addition method. At lower Ni loadings of 1\% and 2\%, low temperature of 160 degrees C as well as at low H(2)pressure of 250 psig, mixture of furfuryl alcohol and 2-methyl furan were formed selectively. Catalyst could be successfully reused up to 3 times without leaching of metals.

}, keywords = {2-Methyltetrahydrofuran, Bimetallic catalyst, furfural, Hydrogenation, OER type mechanism}, issn = {2365-6549}, doi = {10.1002/slct.202002322}, author = {Date, Nandan S. and Hengne, Amol M. and Huang, K. -W. and Chikate, Rajeev C. and Rode, Chandrashekhar V.} } @article {47439, title = {Elucidating the effect of solid base on the hydrogenation of C5 and C6 sugars over Pt{\textendash}Sn bimetallic catalyst at room temperature}, journal = {Carbohydrate Research}, volume = {505}, year = {2021}, month = {JUL}, pages = {108341}, type = {Article}, abstract = {

Conversion of sugars into\ sugar alcohols\ at room temperature with exceedingly high yields are achieved over Pt{\textendash}Sn/γ-Al2O3\ catalyst in the presence of calcined\ hydrotalcite. pH of the reaction mixture significantly affects the conversion and selectivity for sugar alcohols. Selection of a suitable base is the key to achieve optimum yields. Various solid bases in combination with Pt{\textendash}Sn/γ-Al2O3\ catalysts were evaluated for hydrogenation of sugars. Amongst all combinations, the mixture (1:1\ wt/wt) of Pt{\textendash}Sn/γ-Al2O3\ and calcined hydrotalcite showed the best results. Hydrotalcite helps to make the pH of reaction mixture alkaline at which sugar molecules undergo ring opening. The sugar molecule in open chain form has\ carbonyl group\ which can be polarized by Sn in Pt{\textendash}Sn/γ-Al2O3\ and Pt facilitates the hydrogenation. In the current work, effect of both; solid base and Sn as a promoter has been studied to improve the yields of sugar alcohols from various C5 and C6 sugars at very mild reaction conditions.

}, keywords = {Bimetallic catalyst, Hydrogenation, Hydrotalcites, Sugar, Sugar alcohols}, issn = {0008-6215}, doi = {10.1016/j.carres.2021.108341}, author = {Tathod, Anup P. and Dhepe, Paresh L.} } @article {49565, title = {Unravelling the Cu-Co nanoparticle synergy over Ceria-Zirconia support toward efficient reverse water gas shift (RWGS) conversion under H2 lean conditions}, journal = {Chemical Engineering Journal}, volume = {508}, year = {2025}, month = {MAR}, pages = {160705}, type = {Article}, abstract = {

CO2 emissions leading to global warming and environmental and socio-economic issues have propelled the research community to develop technologies capable of capturing and converting CO2 into valuable products. Controlling the selectivity toward platform molecules like CO, methanol, or methane is a fundamental challenge in CO2 hydrogenation. Supported cobalt nanoparticles are known for hydrocarbon production through FischerTropsch (FT) reaction, and Cu-based catalysts are known for reverse water gas shift (RWGS) reaction. Here, we show that d-band centre can be carefully modulated by making bimetallic combinations of Cu and Co for a highly active RWGS catalyst. An oxygen vacancy-rich nanostructured ceria-zirconia (CZ) support with Cu nanoparticles (2 wt\%) modified with as low as 0.05 wt\% Co shows excellent conversion for CO2 hydrogenation and selectivity for CO below 500 degrees C. The optimized catalyst shows CO2 conversion even under hydrogen lean conditions (H2/ CO2 ratio 0.5:1), with a breakthrough rate of 206023 mmol/gmetal/h for CO at 600 degrees C, having H2 utilization of 80\% for the RWGS process.

}, keywords = {Bimetallic catalyst, Ceria-zirconia, CO 2 hydrogenation, Cobalt catalyst, Copper catalyst, Reverse water gas shift (RWGS), synergistic effect}, issn = {1385-8947}, doi = {10.1016/j.cej.2025.160705}, author = {Jagtap, Anuradha Vijay and Bamnia, Mahesh Kumar and Maibam, Ashakiran and Bajpai, Jyotsna Paliwal and Gupta, Sharad and Thomas, Sharon K. and Dabke, Niteen B. and Vinod, C. P.} }