@article { ISI:000236922600002, title = {Room temperature synthesis of mesoporous aggregates of anatase TiO2 nanoparticles}, journal = {Materials Chemistry and Physics}, volume = {97}, number = {2-3}, year = {2006}, month = {JUN}, pages = {207-212}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The controlled hydrolysis reaction of titanium tetrabutoxide in presence of acetic acid in isopropanol, i.e. in non-aqueous media was adopted in the present work for the synthesis of nanocrystalline titania followed by aging at ambient conditions for longer duration. The powder XRD shows that the as-dried precursor (without any aging) is non-crystalline in nature. However, room temperature aging for longer duration \> 120 days not only helped to develop crystallinity in TiO2 nanoparticles but also led to the formation of their self-assembly towards mesoporous aggregates creating sponge like TiO2 nano-structure having high surface area similar to 250m (2) g(-1)and narrow pore size distribution of 4-5 nm. TEM observations revealed the generation of spherical TiO2 nanoparticles (4-5 nm) assembled to form stable spongy scaffold having porous network structure with pore size 5-6 nm. Also, presence of a pronounced hysteresis loop in BET isotherm is indicative of a 3D-intersection network of the pores of size 4-5 nm. Further heat-treatment to the aged precursor at 400 degrees C/2 h in air modify pore network structure due to sintering of TiO2 particles as is observed in TEM studies and lowering thereby the surface area to 125 m(2) g(-1) (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Microstructure, porous materials, sol-gel processing, titania}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2005.02.014}, author = {Deshpande, S. B. and Potdar, H. S. and Khollam, Y. B. and Patil, K. R. and Pasricha, R. and Jacob, Nalini E.} } @article { ISI:000311056800010, title = {3D Hexaporous carbon assembled from single-layer graphene as high performance supercapacitor}, journal = {Chemsuschem}, volume = {5}, number = {11}, year = {2012}, month = {OCT}, pages = {2159-2164}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, keywords = {Electrochemistry, Energy storage, graphene, porous materials, Supercapacitors}, issn = {1864-5631}, doi = {10.1002/cssc.201200421}, author = {Yadav, Prasad and Banerjee, Abhik and Unni, Sreekuttan and Jog, Jyoti Prakash and Kurungot, Sreekumar and Ogale, Satishchandra} } @article { ISI:000331774700017, title = {Two-in-one: inherent anhydrous and water-assisted high proton conduction in a 3D metal-organic framework}, journal = {Angewandte Chemie-International Edition}, volume = {53}, number = {10}, year = {2014}, month = {MAR}, pages = {2638-2642}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The development of solid-state proton-conducting materials with high conductivity that operate under both anhydrous and humidified conditions is currently of great interest in fuel-cell technology. A 3Dmetal-organic framework (MOF) with acid-base pairs in its coordination space that efficiently conducts protons under both anhydrous and humid conditions has now been developed. The anhydrous proton conductivity for this MOF is among the highest values that have been reported for MOF materials, whereas its water-assisted proton conductivity is comparable to that of the organic polymer Nafion, which is currently used for practical applications. Unlike other MOFs, which conduct protons either under anhydrous or humid conditions, this compound should represent a considerable advance in the development of efficient solid-state proton-conducting materials that work under both anhydrous and humid conditions.

}, keywords = {conducting materials, fuel cells, metal-organic frameworks, porous materials, proton conduction}, issn = {1433-7851}, doi = {10.1002/anie.201309077}, author = {Nagarkar, Sanjog S. and Unni, SreeKuttan M. and Sharma, Amitosh and Kurungot, Sreekumar and Ghosh, Sujit K.} } @article {44634, title = {High surface area nanoporous carbon derived from high quality jute from Bangladesh}, journal = {Materials Chemistry and Physics}, volume = {216}, year = {2018}, month = {SEP}, pages = {491-495}, type = {Article}, abstract = {

We report an economically viable and environment-friendly strategy for the preparation of nanoporous carbon (NC) from jute which is one of the most abundant natural fibers produced in Bangladesh and some South Asian countries. Nitrogen adsorption-desorption isotherms, X-ray diffraction, Raman spectroscopy, UV spectroscopy, and scanning/transmission electron microscopy were performed to characterize the obtained NC. Three different types of jute-derived NCs have been synthesized at three different temperatures, 700 degrees C, 800 degrees C and 900 degrees C. The NC prepared at 800 degrees C resulted in a high surface area (981 m(2) g(-2)) and was associated with the retention of the original fibrous shapes. This study shows a promising future for jute as a natural precursor for NCs for a myriad of applications ranging from water purification to gas separation to energy conversion and storage.

}, keywords = {Adsorbents, Graphitization, Jute, Nanoporous carbons, porous materials}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2018.05.082}, author = {Khan, Junayet Hossain and Lin, Jianjian and Young, Christine and Matsagar, Babasaheb M. and Wu, Kevin C. W. and Dhepe, Paresh L. and Islam, Md Tofazzal and Rahman, Md Mahbubur and Shrestha, Lok Kumar and Alshehri, Saad M. and Ahamad, Tansir and Salunkhe, Rahul R. and Kumar, Nanjundan Ashok and Martin, Darren J. and Yamauchi, Yusuke and Hossain, Md Shahriar A.} }