@article { ISI:000243765100017, title = {Swelling and mechanical behavior of modified poly(vinyl alcohol)/laponite nanocomposite membranes}, journal = {Journal of Applied Polymer Science}, volume = {103}, number = {5}, year = {2007}, month = {MAR}, pages = {2896-2903}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

Nanocomposite (NC) membranes based on hydrophobically modified PVA and laponite were synthesized with varying laponite content in the feed. The incorporation of laponite in NC membranes was investigated by FTIR spectroscopy and thermogravimetric analysis. The swelling ratio of membranes was determined as a function of temperature and laponite content. Swelling studies of NC membranes exhibited the decrease in swelling with an increase in laponite content in the NC membranes. The swelling ratio of NC membrane with 20\% laponite slightly increased with an increase in temperature. Dynamic mechanical analysis showed the systematic increase in storage modulus with laponite content, which indicates the enhancement of mechanical property upon laponite addition. There was also a decrease in the tan 6 peak values of NC membranes with an increase in laponite content in NCs. The permeabilities through NC membranes as a function of solute size and laponite content were studied and the results showed molecular screening based on size. The permeability of solute reduced due to the presence of well-dispersed laponite in the NC. (c) 2006 Wiley Periodicals, Inc.

}, keywords = {Dynamic mechanical analysis, laponite, membranes, nanocomposite hydrogel, poly(vinyl alcohol)}, issn = {0021-8995}, doi = {10.1002/app.25469}, author = {Nair, Shubhangi H. and Pawar, Kiran C. and Jog, Jyoti Prakash and Badiger, Manohar V.} } @article { ISI:000291194800039, title = {Characterisation of copolymer, poly (hydroxybutyrate-co-hydroxyvalerate) (PHB-co-PHV) produced by halomonas campisalis (MCM B-1027), its biodegradability and potential application}, journal = {Bioresource Technology}, volume = {102}, number = {11}, year = {2011}, month = {JUN}, pages = {6625-6628}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Characterisation of polyhydroxyalkanoate (PHA) film produced by haloalkalitolerant Halomonas campisalis (MCM B-1027) in 14 L SS fermenter revealed it to have composition of monomer units, HB:HV as 96:4 as analysed by (1)H NMR indicating the PHA as a co-polymer of PHB-co-PHV, molecular weight by gel permeation chromatography as 2.08 x 10(6), melting temperature 166.51 degrees C, tensile strength 18.8 MPa; two relaxations namely beta transition corresponding to the glass rubber transition and alpha transition corresponding to crystalline relaxation by Dynamic Mechanical Thermal analysis and only one relaxation corresponding to MWS interfacial polarisation with activation energy of 129 kJ/mol by broadband dielectric spectroscopy. Optical microscopic studies showed typical Maltese-cross pattern of spherulites. The PHA film was found to be biodegradable by standard ASTM method as well as by soil burial method. The leak proof polymer bags prepared from the film could be used as a packaging material. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Biodegradable polymer, Copolymer PHB-co-PHV, Dielectric relaxation spectroscopy, Dynamic mechanical analysis, Halomonas}, issn = {0960-8524}, doi = {10.1016/j.biortech.2011.03.054}, author = {Kulkarni, Snehal O. and Kanekar, Pradnya P. and Jog, Jyoti Prakash and Patil, Prashant A. and Nilegaonkar, Smita S. and Sarnaik, Seema S. and Kshirsagar, Pranav R.} } @article {48386, title = {Reinforcement of electrospun polyurethane fibers with resorcinol-formaldehyde resin}, journal = {Journal of Applied Polymer Science}, volume = {139}, year = {2022}, month = {MAY}, pages = {e52007}, type = {Article}, abstract = {

This work reports a simple method to improve the properties of electrospun nanofibers. The procedure involves developing nanofibers using electrospinning followed by liquid infiltration to reinforce the fibers. Coating of polyurethane nanofibers (PUN) with resorcinol-formaldehyde (RF) significantly improves the properties of PUN. Furthermore, the morphology of fiber interface and the properties of RF coated fibers indicate that RF resin reinforces the interface between the fibers. The method leads to improvement in mechanical properties of PUN. An improvement of about 94\% and 281\% in mechanical properties like tensile strength and modulus, respectively, compared to neat PUN fibers is achieved by coating with 20\% wt/vol of RF solution.

}, keywords = {Dynamic mechanical analysis, electrospinning, liquid infiltration, polyurethane, reinforced nanofibers, resorcinol-formaldehyde}, issn = {0021-8995}, doi = {10.1002/app.52007}, author = {Nair, Kiran Sukumaran and James, Nirmala Rachel} }