@article { ISI:000353753200006,
	title = {Facile gamma radiolytic methodology for TiO2-rGO synthesis: effect on photo-catalytic H-2 evolution},
	journal = {International Journal of Hydrogen Energy},
	volume = {40},
	number = {17},
	year = {2015},
	month = {MAY},
	pages = {5815-5823},
	publisher = {PERGAMON-ELSEVIER SCIENCE LTD},
	address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND},
	abstract = {<p>TiO2 (P25) decorated reduced graphene oxide (rGO) is synthesized by gamma-radiolytic technique using water-ethanol solvent medium. Visible light absorpdon was confirmed by UV-Visible spectroscopy. Photoluminescence (PL) study revealed a decline in electron-hole recombination rate signalled by a sharp fall in luminescence of TiO2. Under such scenario, electron transfer from TiO2 conduction band to the conjugated sheet becomes a preferred pathway in the presence of rGO, which is further confirmed by photocurrent measurement. TiO2 -rGO composite with 1 wt. \% rGO was found to be the best composition in terms of visible light absorption, while retaining TiO2 crystallinity. Transmission electron microscopy and Raman spectroscopic studies confirmed the coating of rGO sheet with TiO2 nanoparticles. TiO2 -rGO was found to show about 150 times higher photocatalytic H-2 generation under 250 W UV-Visible light irradiation than pristine TiO2. In addition to this, TiO2 -rGO composite shows hydrogen production yield of 35 mu mol/h.g under visible light (lambda = 400 nm) irradiation. Thus gamma-radiolysis can be considered to be a viable technique, which helps in synthesizing photocatalytically active nanocomposite with high H-2 evolution rate. In the light of these interesting aspects, a detail investigation is carried out to study the effect of rGO concentration and illumination time on photocatalytic yield. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.</p>},
	keywords = {gamma-radiolysis, H-2 production, Photocatalysis, Reduced graphene oxide, TiO2},
	issn = {0360-3199},
	doi = {10.1016/j.ijhydene.2015.02.102},
	author = {Gupta, Bhavana and Melvin, Ambrose A. and Matthews, Tom and Dhara, S. and Dash, Sitaram and Tyagi, A. K.}
}
@article {46953,
	title = {Controlling and stabilization of Ru nanoparticles by tuning the nitrogen content of the support for enhanced H-2 production through aqueous-phase reforming of glycerol},
	journal = {ACS Catalysis},
	volume = {10},
	year = {2020},
	month = {FEB},
	pages = {2489-2507},
	type = {Article},
	abstract = {<p>The stable activity of catalysts is an important issue in catalysis, particularly aqueous-phase reforming (APR) of renewable oxygenates, of biomass origin, to get H-2. Sintering of metal nanoparticles on supports affects catalyst stability. To alleviate this problem, a series of highly stable Ru-supported catalysts with controlled metal nanoparticle sizes have been prepared via the easy incipient wetness impregnation method. These catalysts were used for APR of glycerol to produce H-2. Nitrogen-doped mesoporous carbons (NMCs) were utlized as supports and found to have a strong influence on the catalytic performance of the catalysts. Incorporation of nitrogen in the carbon framework significantly enhanced the catalytic activity compared to Ru catalysts on nitrogen-free supports. Notably, the catalyst (5 wt \% Ru-NMC-3) with optimal N content (10.9 wt \%) demonstrated improved stability and H-2 selectivity, which are better than those of many state-of-the-art catalysts. Nitrogen in the carbon framework has a dual relationship with the activity of the catalyst: (i) it creates basic environment over the catalysts support and (ii) it acts as an anchoring site for metal nanoparticles. Anchoring of metal nanoparticles has helped to curb their sintering, thus leading to better stability of the catalysts under APR reaction conditions. Various characterization techniques were employed to understand the nature of active catalytic sites responsible for higher H-2 production while minimizing CO formation. In situ CO-FTIR studies showed that the higher catalytic activity of 5 wt \% Ru-NMC-3 catalyst was attributed to the enhanced WGS activity over this catalyst. Density functional theory calculations were performed to understand the stabilization of metal nanoparticles by different types of N present on the support and provide insights into the prefered sites of glycerol adsorption on the NMC support. Since S wt \% Ru-NMC-3 was the relatively best catalyst, it was selected for the preparation of bimetallic catalysts. Accordingly, addition of Pt to this system helped to increase the stability of the catalyst. This bimetallic catalyst may, therefore, find application for wide use in APR of biomass oxygenates.</p>
},
	keywords = {aqueous-phase reforming, Glycerol, H-2 production, Ru/NMC catalyst, synergistic effect},
	issn = {2155-5435},
	doi = {10.1021/acscatal.9b04063},
	author = {Gogoi, Pranjal and Kanna, Narsimharao and Begum, Pakiza and Deka, Ramesh C. and Satyanarayana, C. V. V. and Raja, Thirumalaiswamy}
}
