02524nas a2200277   4500008004100000022001400041245012100055210006900176260000800245300001400253490000600267520153600273653002301809653003101832653002801863653002501891653001901916653001801935100002601953700003101979700002502010700002602035700003002061700002702091856012802118       2024                        eng d  a2574-096200aTriazatruxene amine donor-based visible-light-responsive unsymmetrical squaraine dyes for dye-sensitized solar cells0 aTriazatruxene amine donorbased visiblelightresponsive unsymmetri  cSEP  a7982-79910 v73 a<p>
	Optimized charge-transfer dynamics at the dye-TiO2/electrolyte interface are required for an enhanced dye-sensitized solar cell (DSSC) device performance. Such an optimized interface enhances the charge-injection, dye-regeneration, and diminished charge-recombination processes, synergistically enhancing the device efficiency. In this study, octupolar-structured sensitizers are designed to improve the interaction between the dye and the redox electrolyte for increasing the dye-regeneration process upon photoexcitation. Accordingly, a set of unsymmetrical squaraine dyes with indoline and triazatruxene amine donor-based D-A-D dyes are designed (KV1-KV3), synthesized, and sensitized with a semiconducting metal oxide (TiO2) film. The sensitizer forms a monolayer on the TiO2 surface, leading to a dye-dye interaction, which broadens the absorption spectrum. The N atom of the triazatruxene amine donor was left unsubstituted in KV1, whereas a hexyl chain was installed in KV2 and KV3 and a branched alkyl chain was installed on the core N atoms in KV3 to control the self-assembly of dyes on the TiO2 surface. Self-assembly of alkyl groups wrapped in KV1-KV3 dyes on the TiO2 surface aids surface passivation and broadens the absorption profile, improving the light-harvesting capabilities. The DSSC devices based on KV2 exhibited a high power conversion efficiency of 7.85% (V-oc = 794 mV, J(sc) = 14.76 mA/cm(2), and FF = 67%), with an onset incident photon-to-current conversion efficiency response from 680 nm.</p>
10aaggregationof dyes10aDye-sensitized solar cells10ametal-free organic dyes10aself-assembly of dye10asquaraine dyes10atriazatruxene1 aIngole, Kiran, Balaso1 aDeshmukh, Shivdeep, Suresh1 aVerma, Tushar, Singh1 aKrishnamurty, Sailaja1 aKrishnamoorthy, Kothandam1 aNithyanandhan, Jayaraj  uhttp://library.ncl.res.in/content/triazatruxene-amine-donor-based-visible-light-responsive-unsymmetrical-squaraine-dyes-dye02639nas a2200289   4500008004100000022001400041245015900055210006900214260000800283300001100291490000800302520162200310653002401932653002101956653002401977653003102001653002502032653001902057653001802076100002602094700001602120700001702136700001702153700003002170700002702200856012202227       2025                        eng d  a1010-603000aDouble anchoring squaraine dye with triazatruxene amine donor for dye-sensitized solar cells: sequential cosensitization for panchromatic light-harvesting0 aDouble anchoring squaraine dye with triazatruxene amine donor fo  cMAY  a1162290 v4623 a<p>
	Dyes are firmly bound to a semiconducting TiO2 film using carboxylic acid anchoring groups for an efficient electron transfer from the excited state of dye to the conduction band (CB) of TiO2. Strong dye binding can be accomplished with multi-anchoring dye designs to improve photophysical characteristics, including high extinction coefficients, panchromatic absorption, post-sensitization modifications, and dark current suppression, besides enhancing the stability of the dye-TiO2 interface. Herein, a novel KV2D dye with double squaraine acceptor and double carboxylic acid anchoring groups is designed to achieve a high extinction coefficient (epsilon, 3.57 x 105M-1cm-1) and robust binding to the TiO2 film for an effective electron transfer. We systematically changed the amount of coadsorbent chenodeoxycholic acid (CDCA) to control the aggregation of dyes on the TiO2 surface that improves the power conversion efficiency (PCE, eta) for the devices based on the doubleanchoring KV2D. Out of these devices, KV2D: CDCA (1:10) based cell exhibited the best PCE of 5.26% with VOC of 754 mV, JSC of 10.41 mA/cm2, and ff of 67%. The sequential cosensitization studies were carried out with a far-red active dye to find the effect of the strong binding of the sensitizer to the TiO2 film. Interestingly, when di-anchoring, KV2D was sensitized first for 12 h and then sequentially cosensitized with far-red absorbing SQS4 for 5 h to achieve a PCE of 5.0% with VOC of 697 mV, JSC of 10.23 mA/cm2, and ff of 70% with panchromatic spectral response in IPCE upto 730 nm giving higher photocurrent generation.</p>
10aaggregation of dyes10aBulky donor unit10aDouble acceptor dye10aDye-sensitized solar cells10aself-assembly of dye10asquaraine dyes10atriazatruxene1 aIngole, Kiran, Balaso1 aSiby, Jesna1 aPandya, Rinu1 aVanka, Kumar1 aKrishnamoorthy, Kothandam1 aNithyanandhan, Jayaraj  uhttp://library.ncl.res.in/content/double-anchoring-squaraine-dye-triazatruxene-amine-donor-dye-sensitized-solar-cells