02029nas a2200253 4500008004100000022001400041245010900055210006900164260000800233490000600241520111800247653002201365653002701387653003101414653001701445653003201462100002701494700002401521700003401545700001801579700003001597700002701627856012101654 2023 eng d a2367-093200aModular TiO2-squaraine dyes/electrolyte interface for dye-sensitized solar cells with cobalt electrolyte0 aModular TiO2squaraine dyeselectrolyte interface for dyesensitize cAPR0 v73 a

Strategies to diminish both charge recombination and aggregation of dyes on the photoanode by functionalizing the sensitizer with alkyl groups is the best approach to achieve high dyesensitized solar cell (DSSC) efficiency. Development of such a photoanode with NIR-active dyes which is compatible with a cobalt electrolyte is important to enhance the photovoltaic performance. In this report, alkyl-group-wrapped donor-acceptor-donor (D-A-D) based unsymmetrical squaraine dyes have been used for DSSC device characterization with a cobalt electrolyte. Surface passivation of photoanode was varied systematically by the extent of functionalization with alkyl groups to avoid charge recombination. DSSC device performance of 5.92% was achieved for an alkyl-group-wrapped squaraine dye with a cobalt electrolyte. Hence, appending the alkyl groups on the donor unit of squaraine dyes helps passivating the photoanode, whereas introducing hydrophilic groups provides a leaky surface where oxidized electrolyte species reach the titanium-metal-oxide surface which promotes the charge recombination process.

10acounter-electrode10aDSSC device efficiency10aDye-sensitized solar cells10aElectrolytes10aunsymmetrical squaraine dye1 aSingh, Ambarish, Kumar1 aSudhakar, Vediappan1 aJavaregowda, Bharathkumar, H.1 aBisht, Rajesh1 aKrishnamoorthy, Kothandam1 aNithyanandhan, Jayaraj uhttp://library.ncl.res.in/content/modular-tio2-squaraine-dyeselectrolyte-interface-dye-sensitized-solar-cells-cobalt01963nas a2200253 4500008004100000022001400041245011800055210006900173260000800242490000600250520107500256653002001331653001901351653003101370653002501401653001901426100001801445700002701463700001701490700001701507700003001524700002701554856012801581 2023 eng d a2367-093200aVisible-light-active unsymmetrical squaraine dyes with 1 V of open-circuit voltage for dye-sensitized solar cells0 aVisiblelightactive unsymmetrical squaraine dyes with 1 V of open cMAY0 v73 a

A series of alkyl-group-functionalized, aniline- and indoline-donor-based, unsymmetrical visible-light-active squaraine dyes, AM1-3, were designed and synthesized. Dye-sensitized solar cell (DSSC) devices were fabricated with both I-/I-3(-) and [Cu(tmby)(2)](+/2+) electrolytes. DSSC devices sensitized with the AM1 and AM2 dyes showed relatively high-power conversion efficiency of 7.44 % and 7.22 %, respectively with I-/I-3(-) in the absence of chenodeoxycholic acid (CDCA) than those of the AM3 dye (5.41 %). The [Cu(tmby)(2)](+/2+) electrolyte along with poly(3,4-ethylenedioxythiophene) (PEDOT) as cathode material showed excellent open-circuit potentials (V-OC) of 1030, 1025, and 1001 mV with the DSSC efficiency of 8.05 %, 7.96 %, and 5.84 %, respectively, for the AM1, AM2, and AM3 dyes in the absence of CDCA. Here, the AM1 dye exhibited the maximum DSSC efficiency of 8.05 % and V-OC of 1030 mV, which is the highest obtained efficiency and V-OC for the visible-light active zwitterionic unsymmetrical-squaraine dye with copper-based electrolyte.

10aCu electrolytes10adihedral angle10aDye-sensitized solar cells10aopen circuit voltage10asquaraine dyes1 aSingh, Amrita1 aSingh, Ambarish, Kumar1 aDixit, Ruchi1 aVanka, Kumar1 aKrishnamoorthy, Kothandam1 aNithyanandhan, Jayaraj uhttp://library.ncl.res.in/content/visible-light-active-unsymmetrical-squaraine-dyes-1-v-open-circuit-voltage-dye-sensitized02524nas a2200277 4500008004100000022001400041245012100055210006900176260000800245300001400253490000600267520153600273653002301809653003101832653002801863653002501891653001901916653001801935100002601953700003101979700002502010700002602035700003002061700002702091856012802118 2024 eng d a2574-096200aTriazatruxene amine donor-based visible-light-responsive unsymmetrical squaraine dyes for dye-sensitized solar cells0 aTriazatruxene amine donorbased visiblelightresponsive unsymmetri cSEP a7982-79910 v73 a

Optimized charge-transfer dynamics at the dye-TiO2/electrolyte interface are required for an enhanced dye-sensitized solar cell (DSSC) device performance. Such an optimized interface enhances the charge-injection, dye-regeneration, and diminished charge-recombination processes, synergistically enhancing the device efficiency. In this study, octupolar-structured sensitizers are designed to improve the interaction between the dye and the redox electrolyte for increasing the dye-regeneration process upon photoexcitation. Accordingly, a set of unsymmetrical squaraine dyes with indoline and triazatruxene amine donor-based D-A-D dyes are designed (KV1-KV3), synthesized, and sensitized with a semiconducting metal oxide (TiO2) film. The sensitizer forms a monolayer on the TiO2 surface, leading to a dye-dye interaction, which broadens the absorption spectrum. The N atom of the triazatruxene amine donor was left unsubstituted in KV1, whereas a hexyl chain was installed in KV2 and KV3 and a branched alkyl chain was installed on the core N atoms in KV3 to control the self-assembly of dyes on the TiO2 surface. Self-assembly of alkyl groups wrapped in KV1-KV3 dyes on the TiO2 surface aids surface passivation and broadens the absorption profile, improving the light-harvesting capabilities. The DSSC devices based on KV2 exhibited a high power conversion efficiency of 7.85% (V-oc = 794 mV, J(sc) = 14.76 mA/cm(2), and FF = 67%), with an onset incident photon-to-current conversion efficiency response from 680 nm.

10aaggregationof dyes10aDye-sensitized solar cells10ametal-free organic dyes10aself-assembly of dye10asquaraine dyes10atriazatruxene1 aIngole, Kiran, Balaso1 aDeshmukh, Shivdeep, Suresh1 aVerma, Tushar, Singh1 aKrishnamurty, Sailaja1 aKrishnamoorthy, Kothandam1 aNithyanandhan, Jayaraj uhttp://library.ncl.res.in/content/triazatruxene-amine-donor-based-visible-light-responsive-unsymmetrical-squaraine-dyes-dye03070nas a2200277 4500008004100000022001400041245013500055210006900190260000900259300001400268490000600282520203300288653002402321653002502345653003102370653003502401653005202436100002402488700002702512700002702539700001602566700002602582700003002608700002702638856012702665 2025 eng d a2574-096200aEffect of cyclization and alkyl group wrapping in visible-light-active unsymmetrical squaraine dyes for dye-sensitized solar cells0 aEffect of cyclization and alkyl group wrapping in visiblelightac cAPR  a5017-50300 v83 a

A series of alkyl group-appended indoline- and carboxylic acid-functionalized indolenine-based visible-light-active unsymmetrical squaraine dyes, SQA7-10, were designed, synthesized, and utilized for the dye-sensitized solar cells device fabrication. The number of alkyl group has been increased systematically on the indoline moiety to control the self-assembly of dyes on TiO2 and to passivate the photoanode that helps in improving the open-circuit voltage (V-OC) by avoiding the charge recombination process. SQA7-10 dyes showed an absorption between lambda(max) 536-540 nm, with molar extinction coefficients of 1.62-2.13 x 10(5) M-1 cm(-1) in CH3CN. Further, ultraviolet-visible (UV-vis) studies on TiO2 indicated the formation of H-aggregated dyes (505-510 nm), which can be controlled by appending the alkyl groups. The energy levels of the highest occupied molecular orbital (HOMO) of these dyes are well aligned with the Nernst potentials of I-/I(3)(-)electrolyte and [Cu(tmby)(2)](+/2+) electrolytes with sufficient overpotentials required for the dye regeneration process. DSSC devices made with these dyes showed systematic enhancements of open-circuit voltage (V-OC) and device efficiency with respect to alkyl group incorporation for SQA7-10 with I-/I-3(-) electrolytes. All of the SQA dyes exhibited the device V-OC of more than 805 mV, where the introduction of alkyl groups systematically enhanced the V-OC in the order of SQA7 (805 mV) < SQA8 (829 mV) < SQA9 (843 mV) < SQA10 (862 mV) without any addition of CDCA. Within the SQA dye series, SQA10 dye has achieved the highest DSSC device efficiency of 7.52% (J(sc) of 11.16 mA/cm(2), V-oc of 862 mV, and ff of 78%) with I-/I-3(-) electrolyte, whereas use of [Cu(tmby)(2)](+/2+) redox shuttle with SQA10 showed enhanced V-oc (1080 mV) and device efficiency (8.35%). The IPCE profile for the device fabricated with SQA dyes showed good response at 480 and 560 nm, which indicates the photocurrent generation from the aggregated structures.

10aaggregation of dyes10acharge recombination10aDye-sensitized solar cells10aindoline and indolenine donors10avisible-light-activeunsymmetrical squaraine dye1 aJadhav, Avinash, P.1 aSingh, Ambarish, Kumar1 aShivankar, Bhavana, R.1 aSiby, Jesna1 aKrishnamurty, Sailaja1 aKrishnamoorthy, Kothandam1 aNithyanandhan, Jayaraj uhttp://library.ncl.res.in/content/effect-cyclization-and-alkyl-group-wrapping-visible-light-active-unsymmetrical-squaraine