02408nas a2200289 4500008004100000022001400041245009300055210006900148260009200217300001200309490000800321520145200329653001801781653001501799653000801814653000901822653001401831653000801845653001601853653000801869100003001877700002001907700002201927700002001949700002601969856012301995 2006 eng d a1042-015000aIrradiation effects of 12 eV oxygen ions on polyimide and fluorinated ethylene propylene0 aIrradiation effects of 12 eV oxygen ions on polyimide and fluori a4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLANDbTAYLOR & FRANCIS LTDcAUG a495-5040 v1613 a

Polyimide (PI) and Fluorinated Ethylene Propylene (FEP) samples (15mm x 15mm x 50 mu m ) were exposed to atomic oxygen ions of average energy similar to 12 eV and flux similar to 5x10(13) ions cm(-2) s(-1) , produced in the Electron Cyclotron Resonance (ECR) plasma. The energy and the flux of the oxygen ions at different positions in the plasma were measured by a retarding field analyzer. The fluence of the oxygen ions was varied from sample to sample in the range of similar to 5x10(16) to 2x10(17) ions cm(-2) by changing the irradiation period. The pre- and the post-irradiated samples were characterized by the weight loss, Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), and Fourier Transform Infrared (FTIR) techniques. The weight of the PI and FEP samples decreased with increasing the ion fluence. However, the erosion yield for the PI is found to be higher, by almost a factor five, when compared with that of FEP. On the surface region of irradiated samples, the concentrations of the carbon, fluorine, and oxygen and their corresponding chemical bonds have changed appreciably. Moreover, blisters and nanoglobules were also observed even at a fluence of similar to 10(17) ions cm(-2) . This oxygen ion fluence is almost two orders of magnitude lower than that of the 5 eV atomic oxygen, which a satellite encounters in the space, at the low Earth orbit, during its mission period of about 7 years.

10aatomic oxygen10aECR plasma10aFEP10aFTIR10aPolyimide10aSEM10aweight loss10aXPS1 aMajeed, Riyadh, M A Abdul1 aPurohit, V., S.1 aBhoraskar, S., V.1 aMandale, A., B.1 aBhoraskar, Vasant, N. uhttp://library.ncl.res.in/content/irradiation-effects-12-ev-oxygen-ions-polyimide-and-fluorinated-ethylene-propylene-002332nas a2200241 4500008004100000022001400041245011800055210006900173260008700242300001200329490000700341520139100348653003001739653002101769653001401790653002601804653003101830100002801861700002201889700002101911700002801932856013001960 2013 eng d a0954-008300aNew organosoluble aromatic poly(esterimide)s containing pendent pentadecyl chains: synthesis and characterization0 aNew organosoluble aromatic polyesterimides containing pendent pe a1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLANDbSAGE PUBLICATIONS LTDcNOV a735-7430 v253 a

A new diimide dicarboxylic acid, namely 2,2-(4-pentadecyl-1,3-phenylene)bis(1,3-dioxoisoindoline-5-carboxylic acid), containing preformed imide rings and pentadecyl chain, was synthesized by the reaction of 4-pentadecylbenzene-1,3-diamine with trimellitic anhydride. A series of new aromatic poly(esterimide)s (PEIs) was synthesized using diphenylchlorophosphate-activated direct polycondensation of 2,2-(4-pentadecyl-1,3-phenylene)bis(1,3-dioxoisoindoline-5-carboxylic acid), with five commercially available bisphenols, namely 4,4-isopropylidenediphenol (I), 4,4-(hexafluoroisopropylidene)diphenol (II), 4,4-oxydiphenol (III), 4,4-biphenol (IV), and 4,4-(9-fluorenylidene)diphenol (V) in the presence of pyridine and lithium chloride. Inherent viscosities of PEIs were in the range 0.54-0.83dLg(-1) in chloroform (CHCl3) at 30 +/- 0.1 degrees C. PEIs containing pendent pentadecyl chains were soluble in organic solvents such as CHCl3, m-cresol, N, N-dimethylacetamide, 1-methyl-2-pyrrolidinone, pyridine, and nitrobenzene. Tough, transparent, and flexible films of PEIs could be cast from their CHCl3 solutions. PEIs exhibited glass transition temperature in the range 145-198 degrees C. The temperature at 10% weight loss of PEIs, determined by thermogravimetric analysis under the nitrogen atmosphere, was in the range of 450-470 degrees C indicating good thermal stability.

10apendent pentadecyl chains10aPolycondensation10aPolyimide10aPreformed imide rings10aThermogravimetric analysis1 aSadavarte, Nilakshi, V.1 aPatil, Sachin, S.1 aAvadhani, C., V.1 aWadgaonkar, Prakash, P. uhttp://library.ncl.res.in/content/new-organosoluble-aromatic-polyesterimides-containing-pendent-pentadecyl-chains-synthesis-002136nas a2200229 4500008004100000022001400041245015800055210006900213260008700282300001000369490000700379520120700386653003701593653001401630653002901644100002701673700002401700700001801724700001901742700001901761856012601780 2016 eng d a0954-008300aSynthesis and characterization of thermally stable polyimides with a pendent phenothiazine unit based on new diamine 10-(3,5-diaminobenzoyl)phenothiazine0 aSynthesis and characterization of thermally stable polyimides wi a1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLANDbSAGE PUBLICATIONS LTDcFEB a26-330 v283 a

A novel diamine 10-(3,5-diaminobenzoyl)phenothiazine (DBPT) with a side chain containing phenothiazine unit was synthesized. A new family of polyimides (PIs) containing phenothiazine unit in the side chains has been successfully synthesized by direct polycondensation of DBPT with pyromellitic dianhydride, 3,3',4,4'-benzophenone tertacarboxylic dianhydride, and 4,4'-oxydiphthalic anhydride (ODA) via a conventional two-step chemical imidization process. The yield of polymers was good enough, which were soluble in most organic solvents. The molecular orbital energy gaps, thermal stability, and crystallinity of PIs were investigated by molecular modeling, thermogravimetric analysis, and wide-angle X-ray scattering, respectively. Thermal properties of polymers were good enough to permit the use of these PIs in various applications; only 49% weight loss is detected at 900 degrees C in nitrogen atmosphere. X-Ray diffraction clearly reveals the amorphous nature of PIs. A quantum modeling study (density functional theory) has shown the influence of dianhydride structure on the energy difference of highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels.

10aphenothiazine-containing diamine10aPolyimide10athermally stable polymer1 aGhorpade, Ravindra, V.1 aThorave, Asmita, K.1 aRajan, C., R.1 aChavan, Nayaku1 aPonrathnam, S. uhttp://library.ncl.res.in/content/synthesis-and-characterization-thermally-stable-polyimides-pendent-phenothiazine-unit-002686nas a2200361 4500008004100000022001400041245021300055210006900268260000800337300001400345490000700359520141200366653002201778653002601800653003401826653001101860653001301871653001501884653001401899653002301913653002401936653002501960653003301985653002502018653001802043653002502061653001302086100002302099700002002122700002302142700002802165856013102193 2017 eng d a0887-624X00aPartially bio-based poly(amide imide)s by polycondensation of aromatic diacylhydrazides based on lignin-derived phenolic acids and aromatic dianhydrides: synthesis, characterization, and computational studies0 aPartially biobased polyamide imides by polycondensation of aroma cNOV a3636-36450 v553 a

Two new bio-based diacylhydrazide monomers, namely, 4,4-(propane-1,3-diylbis(oxy))bis(3-methoxybenzohydrazide) and 4,4-(propane-1,3-diylbis(oxy))bis(3,5-dimethoxybenzohydrazide) were synthesized starting from lignin-derived phenolic acids, namely, vanillic acid and syringic acid. A series of poly(amide imide)s was synthesized by polycondensation of these diacylhydrazide monomers with commercially available aromatic dianhydrides. Poly(amide imide)s showed inherent viscosity in the range 0.44-0.56 dLg(-1) and exhibited good solubility in organic solvents. Poly(amide imide)s could be cast into transparent, flexible, and tough films from their N,N-dimethylacetamide solutions. Poly(amide imide)s showed 10% weight loss in the temperature range 340-364 degrees C indicating their good thermal stability. Glass transition temperature (T-g) of poly(amide imides)s were measured by DSC and DMA which were in the range 201-223 degrees C and 214-248 degrees C, respectively. The T-g values of poly(amide imide)s were dependent on the number methoxy substituents on aromatic rings of diacylhydrazide monomers. Molecular dynamics simulation studies revealed that chain rigidity is the dominant factor for observed trends in T-g. (c) 2017 Wiley Periodicals, Inc.

10aBiobased Polymers10aComputational studies10aGlass-transaction temperature10alignin10aMonomers10aPlant oils10aPolyimide10aReneable resources10aRenewable resources10aStep-growth polymers10astructure-property relations10aSustanaible Polymers10aThermal night10aThermosetting resins10aVanillin1 aKuhire, Sachin, S.1 aSharma, Pragati1 aChakrabarty, Suman1 aWadgaonkar, Prakash, P. uhttp://library.ncl.res.in/content/partially-bio-based-polyamide-imides-polycondensation-aromatic-diacylhydrazides-based-lignin