02738nas a2200265 4500008004100000022001400041245009000055210006900145260007300214300001200287490000800299520182300307653001702130653001902147653001902166653001302185653001502198653002002213100002602233700002802259700002702287700001902314700002302333856011602356 2010 eng d a0926-860X00aVanadia-titania thin films for photocatalytic degradation of formaldehyde in sunlight0 aVanadiatitania thin films for photocatalytic degradation of form aPO BOX 211, 1000 AE AMSTERDAM, NETHERLANDSbELSEVIER SCIENCE BVcFEB a103-1090 v3743 a

Thin films of vanadia-titania with good adhesion to the substrates have been deposited on various substrates such as glass slides, glass helix and silica raschig rings by simple sol-gel dip coating process using vanadium and titanium peroxide gel. The optimum concentration of vanadia in titania for obtaining good uniform viscous gel was found to be 0.5-4 wt% beyond which the vanadia particles disturb the gel network, resulting in the formation of a gelatinous precipitate. The films of vanadia-titania as well as the dried powder of the bulk gel were characterized by different characterization techniques. Optical characterization by UV-vis spectrophotometer showed a shift in optical absorption wavelength to the visible region that may be due to the incorporation of vanadia into titania structure. The XRD revealed the formation of anatase phase in pure titania as well as titania with up to 2% vanadia loading, whereas formation of rutile as minor phase along with anatase as major phase was observed at higher vanadia loading. The XRD did not show any peaks of vanadia phase up to 5% vanadia loading indicating either incorporation of vanadia into titania structure or high dispersion of amorphous vanadia on titania support. The pure and vanadia doped TiO(2) thin films were evaluated for their photocatalytic activity for degradation of methylene blue as a model pollutant under sunlight. Doping Of V(2)O(5) in TiO(2) showed an increase in the photo-degradation rate of methylene blue by a factor of 3-6.6 times compared to pure TiO(2). The highest rate has been obtained for 4% V(2)O(5)-doped TiO(2) films. Vanadia doped TiO(2) thin films were also found to be very active for photocatalytic degradation of formaldehyde from aqueous solution in sunlight. (c) 2009 Elsevier B.V. All rights reserved.

10aFormaldehyde10aMethylene blue10aPhotocatalysis10aSunlight10aThin films10aV(2)O(5)/TiO(2)1 aAkbarzadeh, Rokhsareh1 aUmbarkar, Shubhangi, B.1 aSonawane, Ravindra, S.1 aTakle, Srikant1 aDongare, Mohan, K. uhttp://library.ncl.res.in/content/vanadia-titania-thin-films-photocatalytic-degradation-formaldehyde-sunlight-002130nas a2200253 4500008004100000022001400041245013100055210006900186260000900255300000700264490000700271520127900278653002401557653001001581653001801591653001701609653002301626653001501649100002201664700002201686700001901708700001801727856013101745 2019 eng d a1022-976000aAdsorptive removal of chromium(VI) using spherical resorcinol-formaldehyde beads prepared by inverse suspension polymerization0 aAdsorptive removal of chromiumVI using spherical resorcinolforma cJAN  a410 v263 a

The spherical cross-linked beaded polymers were prepared by condensation of resorcinol and formaldehyde in presence of tri-ethylamine by inverse suspension polymerization technique. The m-cresol, aniline, urea and thiourea were used as co-monomer and polyethylene glycol (PEG 400) was used as porogen. Paraffin oil was used as non-aqueous suspension agent. The polymeric spherical beads were prepared using various types of comonomers exhibiting range of particle size 77.62 to 158.84m at 90 degrees C and 300rpm for 4h. The resulting beads were analyzed by elemental analysis, particle size analysis and scanning electron microscope (SEM). The synthesized beads were used for the removal of Cr(VI) from aqueous solutions. A simple and sensitive solid phase extraction procedure was used for the determination of chromium at trace level by spectrophotometric method using 1,5-diphenylcarbazide reagent. The adsorption of Cr(VI) on the resorcinol-formaldehyde beads was monitored by energy-dispersive X-ray spectroscopy (EDX) analysis. The metal adsorption parameters such as contact time, pH, metal ion concentration and adsorbent dose were investigated. For Cr(VI), the maximum adsorption capacity was about 99% at pH2 for the resorcinol-formaldehyde beads obtained.

10aadsorption kinetics10aBeads10aChromium (VI)10aFormaldehyde10aInverse suspension10aResorcinol1 aMulani, Khudbudin1 aPatil, Vishwanath1 aChavan, Nayaku1 aDonde, Kamini uhttp://library.ncl.res.in/content/adsorptive-removal-chromiumvi-using-spherical-resorcinol-formaldehyde-beads-prepared-inverse01959nas a2200229 4500008004100000022001400041245009500055210006900150260000900219300001100228490000800239520124200247653000801489653001701497653000901514653000801523100001801531700002001549700002801569700001801597856011401615 2024 eng d a0169-433200aFrom digital blueprint to chemical reality: methanol to formaldehyde at ambient conditions0 aFrom digital blueprint to chemical reality methanol to formaldeh cOCT  a1605270 v6693 a

Partial oxidation of methanol to value added product presents an intriguing yet challenging process. Among these products, formaldehyde is the simplest and one of the most vital aliphatic aldehydes, which has extensive application across various domains. Industrially, silver and iron-molybdenum oxides are used as catalysts for the conversion of methanol to formaldehyde at elevated temperatures (600 degrees C and 250-400 degrees C, respectively). However, in this computational and experimental study, we have demonstrated the efficacy of ZnO as a catalyst. Notably, in the presence of ZnO, methanol readily converts to formaldehyde even under ambient conditions. We employed periodic density functional theory (DFT) to explore (10 1 1) facet of ZnO to elucidate its interaction with methanol. Our comprehensive analysis identified the most active facet (10 1 1) involved in the spontaneous conversion of methanol to formaldehyde. Subsequently, experimental validation supported our theoretical findings, demonstrating the conversion of methanol to formaldehyde with 100% selectivity at room temperature and atmospheric pressure in the presence of ZnO. This study exemplifies the pivotal role of theory in catalyst design.

10aDFT10aFormaldehyde10aMeOH10aZnO1 aMehta, Shweta1 aKasabe, Mirabai1 aUmbarkar, Shubhangi, B.1 aJoshi, Kavita uhttp://library.ncl.res.in/content/digital-blueprint-chemical-reality-methanol-formaldehyde-ambient-conditions